STM32DevBoardTestingProject

coreyjharrington-sys·STM32DevBoardTestingProject·hardware/STM32.kicad_pcb

STM32DevBoardTestingProject PCB layout, top view — open source STM32 board by coreyjharrington-sys

About the STM32DevBoardTestingProject PCB

STM32DevBoardTestingProject is an open source STM32 PCB design by coreyjharrington-sys, published on GitHub under the MIT license. It is a 2-layer board measuring 41 × 31 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.

From the project

CI workflow that flashes a STM32F103 board I designed on KiCad and runs Pytest-based HITL validation.

A combined hardware + firmware + automated test demonstration project

This project demonstrates a Hardware-In-The-Loop (HITL)-style automated test pipeline using a custom STM32F103C8T6 development board that I designed in KiCad, combined with firmware validation using Pytest and GitHub Actions.

When code is pushed or a pull request is opened, the CI workflow automatically:

STM32DevBoardTestingProject, from the project README
From the project README

Main components on the STM32DevBoardTestingProject

STM32DevBoardTestingProject bill of materials (BOM)

28 components, 16 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103C8T6
U2
1
16MHz
Y1
1
USB_B_Micro
J1
3
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
Red
D1
1
120R
FB1
2
22u
C1, C2
1
10u
C3
5
100n
C4, C5, C6, C7, C11
1
10n
C8
2
1u
C9, C10
2
10p
C12, C13
4
1.5k
R1, R3, R4, R5
1
10k
R2

STM32DevBoardTestingProject design files

The KiCad project lives in the coreyjharrington-sys/STM32DevBoardTestingProject repository on GitHub; these links point at the commit this page was built from.

STM32DevBoardTestingProject: common questions

What microcontroller does the STM32DevBoardTestingProject use?

The STM32DevBoardTestingProject is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32DevBoardTestingProject PCB?

The STM32DevBoardTestingProject measures 41 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32DevBoardTestingProject?

28 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32DevBoardTestingProject design files?

From the coreyjharrington-sys/STM32DevBoardTestingProject repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32DevBoardTestingProject design in my own project?

Yes, under the terms of its MIT license, which coreyjharrington-sys chose for the repository.

Can I test firmware for the STM32DevBoardTestingProject without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards