HardLabs

Afx-01 hardware

cosmikwolf·afx-01_hardware

Afx-01 hardware PCB layout, top view — open source NXP board by cosmikwolf

About the Afx-01 hardware PCB

Afx-01 hardware is an open source NXP PCB design by cosmikwolf, published on GitHub. It is a 2-layer board measuring 91.4 × 116.8 mm, with 105 components from 34 distinct parts.

Its main chip is the TEENSY_3.1, from the NXP family. Other key parts include the ADA_SSD1306_I2C, SAM2695, MicroSD_Adapter and SSD1306. By type, the board carries 26 capacitors, 19 resistors, 16 switches, 16 LEDs, 5 ICs and 4 connectors.

Main components on the Afx-01 hardware

ADA_SSD1306_I2CTEENSY_3.1SAM2695MicroSD_AdapterSSD1306

Afx-01 hardware bill of materials (BOM)

105 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADA_SSD1306_I2C
U1
1
TEENSY_3.1
Teensy_3.1
U2
1
SAM2695
U3
1
MicroSD_Adapter
U4
1
SSD1306
U5
1
12MHZ
12MHz
X1
1
HeadphoneOut
J1
1
MicIn
J2
2
CONN_02X05
P1, P2
1
Encoder_switch
ENC1
2
MCP23017-QFN
MCP1, MCP2
2
MIDI_CONN_FEMALE
MIDI_IN1, MIDI_OUT1
1
6N139
MIDI_OPTOISOLATOR1
16
DPST_Switch
S1, S2, S3, S4, S5, S6, S7, S8 +8
9
DPST_Switch
SS1, SS2, SS3, SS4, SS5, SS6, SS7, SS8 +1
16
WS2812B
WS2812b
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +8
1
LL4148
D1
1
1A
D2
1
742792093
L1
5
100µf
C1, C2, C3, C4, C22
Show 14 more
QtyPartRefs
2
1µfT
C5, C20
8
100NF
100nF
C6, C7, C8, C9, C10, C15, C18, C26
2
100µfT
C11, C12
2
22PF
22pF
C13, C14
3
10µfT
C16, C17, C19
1
220PF
220pF
C21
2
.01µf
C23, C24
1
4.7µfT
C25
1
500
R1
5
220
R2, R8, R9, R10, R11
5
10K
10k
R3, R12, R13, R14, R15
2
47K
47k
R4, R5
1
0
R6
5
4.7K
4.7k
R7, R16, R17, R18, R19

Afx-01 hardware design files

The KiCad project lives in the cosmikwolf/afx-01_hardware repository on GitHub; these links point at the commit this page was built from.

Afx-01 hardware: common questions

What microcontroller does the Afx-01 hardware use?

The Afx-01 hardware is built around the TEENSY_3.1, from the NXP family.

How big is the Afx-01 hardware PCB?

The Afx-01 hardware measures 91.4 × 116.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Afx-01 hardware?

105 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Afx-01 hardware design files?

From the cosmikwolf/afx-01_hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Afx-01 hardware design in my own project?

The repository has no license, so all rights stay with cosmikwolf. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Afx-01 hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards