Mp6612
About the Mp6612 PCB
Mp6612 is an open source PCB design by cpeniche, published on GitHub. It is a 4-layer board measuring 36.9 × 34 mm, with 32 components from 15 distinct parts.
Other key parts include the MP6612DGF-P. By type, the board carries 13 capacitors, 6 diodes, 5 resistors, 3 connectors, 3 jumpers and 1 IC.
Main components on the Mp6612
Mp6612 bill of materials (BOM)
32 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP6612DGF-P | TSSOP-20EP_MP6612D_MNP | U1 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | OQ0212500000G | OQ0212500000G | J2 |
| 1 | TB002-500-02BE | CUI_TB002-500-02BE | J3 |
| 3 | Jumper_2_Bridged | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP2, JP3 |
| 1 | 10K | Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 5 | B340A | D_SMA | D1, D2, D3, D4, D5 |
| 1 | LED | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D6 |
| 7 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C10, C11, C12 |
| 3 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7 |
| 1 | 100uF | CP_EIA-3216-18_Kemet-A_HandSolder | C8 |
| 1 | 100pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 100uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 2 | 2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 3 | 4.7K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
Mp6612 design files
The KiCad project lives in the cpeniche/hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutMotor/mp6612/mp6612.kicad_pcb
- SchematicMotor/mp6612/mp6612.kicad_sch
Mp6612: common questions
How big is the Mp6612 PCB?
The Mp6612 measures 36.9 × 34 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Mp6612?
32 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mp6612 design files?
From the cpeniche/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mp6612 design in my own project?
The repository has no license, so all rights stay with cpeniche. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
NXPMicroMod-Teensy-Lockable
22 × 22 mm72 parts4LNo license0
DriverModule
100.6 × 67.1 mm69 parts4LNo license0
PcieBreakOutBoard
54 × 52.7 mm45 parts4LNo license0
STM32Stm32f767-som
72.8 × 53.3 mm35 parts4LNo license0
Cnc arduino hat
68 × 56 mm31 parts2LNo license0
ESP32Esp wroom-2-carrier board
33.8 × 34.4 mm31 parts4LNo license0
STM32Stm32g431
30 × 26.8 mm29 parts4LNo license0
Nordic nRFBreakOutBoard
30 × 26.8 mm28 parts4LNo license0
ESP32${DOC TYPE} Document
36 × 38.9 mm17 parts2LNo license0
Mpq6524
28.7 × 29.8 mm16 parts2LNo license0
S3-N32R8V-Carrier Module
45.4 × 38.8 mm3 parts2LNo license0