Cnc arduino hat
About the Cnc arduino hat
Cnc arduino hat is an open source PCB design by cpeniche, published on GitHub. It is a 2-layer board measuring 68 × 56 mm, with 31 components from 16 distinct parts.
Other key parts include the MAX6816EUS+T, CDSOT236-0504C and Pololu_Breakout_A4988. By type, the board carries 14 connectors, 7 ICs, 5 resistors, 3 capacitors, 1 module and 1 switch.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
Main components on the Cnc arduino hat
Cnc arduino hat bill of materials (BOM)
31 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MAX6816EUS+T MAX6816EUS_T Maxim Integrated | SOT-143-4 | U1, U2, U3 |
| 4 | CDSOT236-0504C | SOT-23-6 | U4, U5, U6, U7 |
| 1 | Pololu_Breakout_A4988 | Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | Power | PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | Digital/PWM | PinHeader_1x10_P2.54mm_Vertical_SMD_Pin1Right | J2 |
| 1 | Analog | PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Digital/PWM | PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J4 |
| 5 | ~ | Term_Block_1X4_P3.18mm | J5, J6, J7, J8, J9 |
| 1 | Conn_02x03_Odd_Even | PinSocket_2x03_P2.54mm_Vertical | J10 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J12 |
| 1 | 39301021 | CON_39301021 | J13 |
| 1 | 353180420 | CONN_35318-0420_MOL | J14 |
| 1 | ~ | PinHeader_2x4_P2.54mm_Shrouded | j11 |
| 1 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_9.78x9.8mm_W8.61mm_P2.54mm | SW1 |
| 3 | 0.1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 5 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
Cnc arduino hat design files
The KiCad project lives in the cpeniche/hardware repository on GitHub; these links point at the commit this page was built from.
Cnc arduino hat: common questions
How big is the Cnc arduino hat?
The Cnc arduino hat measures 68 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cnc arduino hat?
31 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cnc arduino hat design files?
From the cpeniche/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cnc arduino hat design in my own project?
The repository has no license, so all rights stay with cpeniche. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
NXPMicroMod-Teensy-Lockable
22 × 22 mm72 parts4LNo license0
DriverModule
100.6 × 67.1 mm69 parts4LNo license0
PcieBreakOutBoard
54 × 52.7 mm45 parts4LNo license0
STM32Stm32f767-som
72.8 × 53.3 mm35 parts4LNo license0
Mp6612
36.9 × 34 mm32 parts4LNo license0
ESP32Esp wroom-2-carrier board
33.8 × 34.4 mm31 parts4LNo license0
STM32Stm32g431
30 × 26.8 mm29 parts4LNo license0
Nordic nRFBreakOutBoard
30 × 26.8 mm28 parts4LNo license0
ESP32${DOC TYPE} Document
36 × 38.9 mm17 parts2LNo license0
Mpq6524
28.7 × 29.8 mm16 parts2LNo license0
S3-N32R8V-Carrier Module
45.4 × 38.8 mm3 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k