HardLabs

MicroMod-Teensy-Lockable

cpeniche·hardware·NXP/IMXRT1062/IMXRT1062-SOM/MicroMod-Teensy-Lockable/MicroMod-Teensy-Lockable/MicroMod-Teensy-Lockable.kicad_pcb

MicroMod-Teensy-Lockable PCB layout, top view — open source NXP board by cpeniche

About the MicroMod-Teensy-Lockable PCB

MicroMod-Teensy-Lockable is an open source NXP PCB design by cpeniche, published on GitHub. It is a 4-layer board measuring 22 × 22 mm, with 72 components from 30 distinct parts.

Its main chip is the 20V/4.2A/52mΩ/1.4W, from the NXP family. Other key parts include the IMXRT1062DV10X10, MKL02Z32VFG4 and W25QXX128MBIT-6X5. By type, the board carries 29 capacitors, 13 test points, 10 ICs, 6 resistors, 5 diodes and 3 inductors.

Main components on the MicroMod-Teensy-Lockable

IMXRT1062DV10X10MKL02Z32VFG4W25QXX128MBIT-6X5

MicroMod-Teensy-Lockable bill of materials (BOM)

72 components, 30 distinct parts.

QtyPartRefs
1
IMXRT1062DV10X10
U1
1
MKL02Z32VFG4
U3
1
W25QXX128MBIT-6X5
U4
2
—
U$1, U$3
1
—
U$8
1
—
U$9
1
—
U$10
2
—
U$16, U$17
1
20V/4.2A/52mΩ/1.4W
Q1
1
20V/0.2A/8MHz/1.2Ω/1Vth
Q2
1
32.768kHz
Y1
1
24MHz
Y2
1
FRAME-LEDGER
FRAME1
1
—
MEAS0
13
—
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +5
1
BLUE
D1
3
120mA/40V/370mV
D2, D3, D4
1
Yellow
D5
2
120Ω
FB1, FB2
1
4.7μH
L2
Show 10 more
QtyPartRefs
2
2.2uF
C1, C11
5
4.7uF
C2, C14, C18, C26, C27
13
0.22uF
C3, C4, C12, C13, C15, C17, C20, C22 +5
2
10nF
C5, C16
2
12pF
C6, C7
2
20pF
C8, C9
3
10uF
C10, C19, C21
2
1k
R1, R7
3
100k
R2, R5, R6
1
2.2M
R4

MicroMod-Teensy-Lockable design files

The KiCad project lives in the cpeniche/hardware repository on GitHub; these links point at the commit this page was built from.

MicroMod-Teensy-Lockable: common questions

What microcontroller does the MicroMod-Teensy-Lockable use?

The MicroMod-Teensy-Lockable is built around the 20V/4.2A/52mΩ/1.4W, from the NXP family.

How big is the MicroMod-Teensy-Lockable PCB?

The MicroMod-Teensy-Lockable measures 22 × 22 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MicroMod-Teensy-Lockable?

72 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the MicroMod-Teensy-Lockable design files?

From the cpeniche/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MicroMod-Teensy-Lockable design in my own project?

The repository has no license, so all rights stay with cpeniche. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MicroMod-Teensy-Lockable without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in hardware

Similar boards