Eaaeoe
cr1tbit·eaaeoe
About the Eaaeoe PCB
Eaaeoe is an open source STM32 PCB design by cr1tbit, published on GitHub. It is a 2-layer board measuring 73.5 × 59.5 mm, with 114 components from 35 distinct parts.
Its main chip is the STM32F103RFTx, from the STM32 family. Other key parts include the USBLC6-2SC6, MCP1700-3302E_SOT23 and MCP6L04x-xSL. By type, the board carries 50 resistors, 27 capacitors, 11 connectors, 9 diodes, 6 ICs and 6 transistors.
It belongs with the audio designs in this gallery.
From the project
Elegant analog audio extended over ethernet xd
Main components on the Eaaeoe
Eaaeoe bill of materials (BOM)
114 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 2 | MCP1700-3302E_SOT23 | SOT-23 | U2, U5 |
| 2 | MCP6L04x-xSL | SOIC-14_3.9x8.7mm_P1.27mm | U3, U6 |
| 1 | STM32F103RFTx | LQFP-64_10x10mm_P0.5mm | U4 |
| 2 | S9015 | SOT-23 | Q1, Q2 |
| 4 | MMBT2222A | SOT-23 | Q3, Q4, Q5, Q6 |
| 1 | 8MHZ 2520 | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
| 1 | DBG_HDR | PinSocket_2x06_P2.54mm_Vertical | J2 |
| 2 | AUDIO_IN | Jack_3.5mm_CUI_SJ1-3535NG_Horizontal_CircularHoles | J3, J11 |
| 2 | RJ45 | RJ45_OST_PJ012-8P8CX_Vertical | J4, J9 |
| 1 | AUDIO_HDR | PinSocket_2x03_P2.54mm_Vertical | J5 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | OLED | PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J8 |
| 1 | Conn_02x08_Odd_Even | PinSocket_2x08_P2.54mm_Vertical | J10 |
| 1 | 1A | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | F1 |
| 1 | 10k | Potentiometer_Alps_RK163_Dual_Horizontal | RV2 |
| 1 | BUT_SMD | SW_SPST_TL3342 | SW1 |
| 5 | LED_0603 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D7 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1N5819WS | D_SOD-323 | D5, D6, D8, D9 |
| 1 | L_Small | L_1206_3216Metric | L1 |
| 7 | 4.7u | C_0402_1005Metric | C1, C2, C3, C4, C20, C25, C26 |
| 8 | 100n | C_0402_1005Metric | C5, C11, C12, C13, C14, C15, C17, C27 |
| 6 | 1u/630V | C_Disc_D10.0mm_W2.5mm_P5.00mm | C6, C7, C8, C9, C16, C18 |
| 2 | 10n | C_0402_1005Metric | C10, C19 |
| 2 | 20p | C_0402_1005Metric | C21, C22 |
| 2 | 1u/630V | C_0402_1005Metric | C23, C24 |
| 4 | 470 | R_0402_1005Metric | R1, R2, R7, R8 |
| 14 | 5.1k | R_0402_1005Metric | R3, R4, R12, R13, R19, R20, R28, R29 +6 |
| 18 | 1k | R_0402_1005Metric | R5, R6, R9, R10, R15, R16, R17, R23 +10 |
| 7 | 10k | R_0402_1005Metric | R11, R24, R34, R35, R36, R42, R48 |
| 4 | 25 | R_0402_1005Metric | R14, R18, R22, R27 |
| 1 | 100k | R_0402_1005Metric | R21 |
| 2 | 100 | R_0402_1005Metric | R38, R46 |
Eaaeoe design files
The KiCad project lives in the cr1tbit/eaaeoe repository on GitHub; these links point at the commit this page was built from.
- Layouteaaeoe.kicad_pcb
- Schematiceaaeoe.kicad_sch
Eaaeoe: common questions
What microcontroller does the Eaaeoe use?
The Eaaeoe is built around the STM32F103RFTx, from the STM32 family.
How big is the Eaaeoe PCB?
The Eaaeoe measures 73.5 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eaaeoe?
114 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Eaaeoe design files?
From the cr1tbit/eaaeoe repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Eaaeoe design in my own project?
The repository has no license, so all rights stay with cr1tbit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Eaaeoe without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k