41 open source boards using the MCP1700-3302E_SOT23
Real designs built with the MCP1700-3302E_SOT23, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mun
RGBKB
154 × 105.1 mm436 parts2LGPL-3.0113STM32
WARS-Birdhouse
brucemack
57 × 35.5 mm20 parts2LGPL-3.066Microchip SAM
Serpente
arturo182
24.8 × 22 mm20 parts2LCERN-OHL-1.235ESP8266
Esp8266-temperature humidity
amadeuspzs
49.9 × 34 mm23 parts2LNo license24ESP32
154-watch
martinberlin
50.3 × 33 mm60 parts4LCERN-OHL-W-2.023AVR RFM95 board
tomtor
51.7 × 29.2 mm34 parts2LGPL-3.020STM32
Power board
open-dynamic-robot-initiative
65 × 35 mm55 parts2LBSD-2-Clause13STM32
Coaster backboard
Jana-Marie
93 × 93 mm126 parts2LNo license11Microchip SAM
Cap sense ctrl
gregdavill
33.6 × 18 mm32 parts4LNo license11ESP32
IndegoRover
MS71
172 × 230 mm28 parts2LNo license7Quectel-BG95-LPWA-Module
Millisman
54.3 × 59 mm87 parts2LApache-2.06ESP32
Epaper breakout
jifanchn
100 × 45 mm98 parts4LNo license5Nordic nRF
H-C3-029-eink
martinberlin
83.4 × 42.1 mm51 parts4LMIT5Prog tool
linuxboot
55 × 26.5 mm70 parts2LGPL-3.04STM32
HDMI-TO-MIPI-MAIN
R-Mutura
77.1 × 49.6 mm126 parts4LNo license1STM32
Eaaeoe
cr1tbit
73.5 × 59.5 mm114 parts2LNo license1Nordic nRF
Skulljack
ultimaterobotics
40 × 34.6 mm66 parts2LMIT1WLR089U0-SAMR34-Dev-Board-LoRaWAN
jithinsisaac
35.9 × 40.9 mm22 parts2LNo license1STM32
Sagittarius
AcheronProject
372.4 × 128.1 mm382 parts2LNo license0STM32
CoquiKeyboard snapshot-21-9-2021
coquizen
307.4 × 81.3 mm149 parts2LNo license0STM32
Cutouts
Fabian0520
265.2 × 79 mm118 parts2LNo license0STM32
HDMI-T0-MIPI-2
R-Mutura
90 × 55 mm114 parts4LNo license0ESP32
Epaper breakout
entozoon
100 × 45 mm98 parts4LNo license0ESP32
Epaper breakout
orgTestCodacy11KRepos110MB
100 × 45 mm98 parts4LNo license0ESP32
Epaper breakout
SkinnyGnome
100 × 45 mm98 parts4LNo license0STM32
Spha btnn hardware
sillevl
37.6 × 37.6 mm68 parts4LNo license0STM32
Spha btnu hardware
sillevl
29 × 29 mm47 parts4LNo license0Kicad
tursilion
100 × 64 mm23 parts2LCustom license0RP2040/RP2350
10087
RGBKB
142.7 × 95.7 mm387 parts2LGPL-3.0113Microchip SAM
Serpente plug c
arturo182
24.3 × 22 mm19 parts2LCERN-OHL-1.235AVR RFM95 805 board
tomtor
51.7 × 29.2 mm34 parts2LGPL-3.020AVR/Arduino
Counter pneumatic v1
jekhor
91.4 × 116.2 mm38 parts2LNo license2Nordic nRF
Sharp-LV
martinberlin
69.7 × 44.7 mm50 parts4LMIT1PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN)
jithinsisaac
68.1 × 70.7 mm47 parts2LGPL-3.01STM32
CoquiKeyboard
coquizen
307.9 × 77.4 mm148 parts2LNo license0RP2040/RP2350
10133
RGBKB
301.3 × 140.8 mm236 parts2LGPL-3.0113
How designs wire the MCP1700-3302E_SOT23
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the MCP1700-3302E_SOT23 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 28 of 32 designs, most often 100 nF (then 10 µF).
- The VI pin has a decoupling capacitor on 25 of 32 designs, most often 10 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 97% | — |
| VOpin 2 | Connected to: 3.3V 91% |
|
| VIpin 3 | Connected to: 5V 69% · a signal 31% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 10087 by RGBKB, WARS-Birdhouse by brucemack, Serpente by arturo182 and Esp8266-temperature humidity by amadeuspzs.
The MCP1700-3302E_SOT23 in open source designs
The gallery holds 41 open source boards using the MCP1700-3302E_SOT23 from 32 GitHub repositories; a typical one measures about 78 × 45 mm and carries around 55 components.
71% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.
The most starred is Mun by RGBKB.
Parts used alongside the MCP1700-3302E_SOT23
Microcontrollers on boards using the MCP1700-3302E_SOT23
What boards using the MCP1700-3302E_SOT23 are built for
MCP1700-3302E_SOT23: common questions
Where can I find a MCP1700-3302E_SOT23 reference design?
Each of the 41 boards on this page is a real design using the MCP1700-3302E_SOT23. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700-3302E_SOT23 VO pin?
The VO pin has a decoupling capacitor on 28 of 32 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 32 open source designs using the MCP1700-3302E_SOT23.
What decoupling capacitors do designs use on the MCP1700-3302E_SOT23 VI pin?
The VI pin has a decoupling capacitor on 25 of 32 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 32 open source designs using the MCP1700-3302E_SOT23.
What parts are used alongside the MCP1700-3302E_SOT23?
The TPS2113APW, CH340C, ED060XC5, ESP32-WROVER and PCA9535PW appear in the most repositories here.
Which microcontrollers do boards using the MCP1700-3302E_SOT23 use?
Most are built on STM32 (13), ESP32 (6), ESP8266 (5) and Microchip SAM (4).
How big is a typical board using the MCP1700-3302E_SOT23?
The median is 78 × 45 mm, and 71% are two-layer designs.
What is the most popular open source board using the MCP1700-3302E_SOT23?
By GitHub stars, Mun by RGBKB, with 113 stars.
Can I simulate one of these boards using the MCP1700-3302E_SOT23 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.