DMX Demonstrator - Control-Pro Clock (DMX-C
About the DMX Demonstrator - Control-Pro Clock (DMX-C PCB
DMX Demonstrator - Control-Pro Clock (DMX-C is an open source PCB design by crazy-giraffe-software, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 90 mm, with 13 components from 9 distinct parts.
By type, the board carries 6 resistors, 3 diodes, 2 connectors and 2 switches.
From the project
DMX Demonstrator
The Control Pro is built to work with either transmitter or transmitter-retro. When used with an Arduino, an additional board, the Transmitter IO Interface (DMX-TX2), is required to connect the Control Pro to the Arduino. The transmitter software automatically detects whether DMX-TX1, the standard transmitter, or DMX-TX2, the Transmitter IO Interface, is connected.
DMX Demonstrator - Control-Pro Clock (DMX-C bill of materials (BOM)
13 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OUTPUT | IDC-Header_2x08_P2.54mm_Horizontal | J1 |
| 1 | INPUT | IDC-Header_2x08_P2.54mm_Horizontal | J2 |
| 1 | CLOCK_SPEED | ESWITCH_100_DPDT_M1 | SW1 |
| 1 | CLOCK_STEP | ESWITCH_100_SPDT_M1 | SW2 |
| 1 | DATA | LED_D5.0mm | D6 |
| 1 | CLOCK | LED_D5.0mm | D7 |
| 1 | ACTIVE | LED_D5.0mm | D8 |
| 1 | 10k | BOURNS_PTV09A_1 | R5 |
| 5 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R8, R9, R10 |
DMX Demonstrator - Control-Pro Clock (DMX-C design files
The KiCad project lives in the crazy-giraffe-software/dmxdemonstrator repository on GitHub; these links point at the commit this page was built from.
DMX Demonstrator - Control-Pro Clock (DMX-C: common questions
How big is the DMX Demonstrator - Control-Pro Clock (DMX-C PCB?
The DMX Demonstrator - Control-Pro Clock (DMX-C measures 100 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DMX Demonstrator - Control-Pro Clock (DMX-C?
13 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the DMX Demonstrator - Control-Pro Clock (DMX-C design files?
From the crazy-giraffe-software/dmxdemonstrator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DMX Demonstrator - Control-Pro Clock (DMX-C design in my own project?
Yes, under the terms of its GPL-3.0 license, which crazy-giraffe-software chose for the repository.
More boards in dmxdemonstrator
DMX Demonstrator - Transmitter (DMX-TX1)
68.6 × 53.3 mm17 parts2LGPL-3.01
DMX Demonstrator - Receiver (DMX-RX1)
68.6 × 53.3 mm17 parts2LGPL-3.01
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB)
100 × 90 mm16 parts2LGPL-3.01
DMX Demonstrator - Transmitter IO Module (DMX-TX2)
68.6 × 53.3 mm13 parts2LGPL-3.01
DMX Demonstrator - Display-Pro (DMX-DSP)
57.8 × 58.4 mm12 parts2LGPL-3.01