DMX Demonstrator - Display-Pro (DMX-DSP)
About the DMX Demonstrator - Display-Pro (DMX-DSP) PCB
DMX Demonstrator - Display-Pro (DMX-DSP) is an open source PCB design by crazy-giraffe-software, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 57.8 × 58.4 mm, with 12 components from 9 distinct parts.
By type, the board carries 5 connectors, 4 resistors, 2 transistors and 1 diode.
It belongs with the displays & leds designs in this gallery.
From the project
DMX Demonstrator
The display-pro is breakout board designed to intercept the 3-wire data/clock signal from the transmitter to amplify the data and clock signals and drive a larger display intended for a large audience.
It is built to drive an DC output for up to 60v volts so it is compatible with a variety of displays. The parts list has a display and power supply to keep you from having to come up with your own. Feel free to use the recommended option or play around with something else!
DMX Demonstrator - Display-Pro (DMX-DSP) bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | FQP30N06L | TO-220-3_Horizontal_TabDown | Q1, Q2 |
| 1 | POWER | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Input | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | Output | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | Clock | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Data | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J6 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | R? | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R3, R4 |
DMX Demonstrator - Display-Pro (DMX-DSP) design files
The KiCad project lives in the crazy-giraffe-software/dmxdemonstrator repository on GitHub; these links point at the commit this page was built from.
DMX Demonstrator - Display-Pro (DMX-DSP): common questions
How big is the DMX Demonstrator - Display-Pro (DMX-DSP) PCB?
The DMX Demonstrator - Display-Pro (DMX-DSP) measures 57.8 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DMX Demonstrator - Display-Pro (DMX-DSP)?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the DMX Demonstrator - Display-Pro (DMX-DSP) design files?
From the crazy-giraffe-software/dmxdemonstrator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DMX Demonstrator - Display-Pro (DMX-DSP) design in my own project?
Yes, under the terms of its GPL-3.0 license, which crazy-giraffe-software chose for the repository.
More boards in dmxdemonstrator
DMX Demonstrator - Transmitter (DMX-TX1)
68.6 × 53.3 mm17 parts2LGPL-3.01
DMX Demonstrator - Receiver (DMX-RX1)
68.6 × 53.3 mm17 parts2LGPL-3.01
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB)
100 × 90 mm16 parts2LGPL-3.01
DMX Demonstrator - Transmitter IO Module (DMX-TX2)
68.6 × 53.3 mm13 parts2LGPL-3.01
DMX Demonstrator - Control-Pro Clock (DMX-C
100 × 90 mm13 parts2LGPL-3.01
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k