DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB)
About the DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) PCB
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) is an open source PCB design by crazy-giraffe-software, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 90 mm, with 16 components from 9 distinct parts.
By type, the board carries 9 resistors, 5 diodes and 2 connectors.
From the project
DMX Demonstrator
The Control Pro is built to work with either transmitter or transmitter-retro. When used with an Arduino, an additional board, the Transmitter IO Interface (DMX-TX2), is required to connect the Control Pro to the Arduino. The transmitter software automatically detects whether DMX-TX1, the standard transmitter, or DMX-TX2, the Transmitter IO Interface, is connected.
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) bill of materials (BOM)
16 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OUTPUT | IDC-Header_2x08_P2.54mm_Horizontal | J1 |
| 1 | INPUT | IDC-Header_2x08_P2.54mm_Horizontal | J2 |
| 1 | LED | LED_D5.0mm | D8 |
| 1 | DIM4 | LED_D5.0mm | D11 |
| 1 | DIM3 | LED_D5.0mm | D12 |
| 1 | DIM2 | LED_D5.0mm | D13 |
| 1 | DIM1 | LED_D5.0mm | D14 |
| 4 | 10k | BOURNS_PTA4543 | R1, R2, R3, R4 |
| 5 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R11, R12, R13, R14 |
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) design files
The KiCad project lives in the crazy-giraffe-software/dmxdemonstrator repository on GitHub; these links point at the commit this page was built from.
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB): common questions
How big is the DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) PCB?
The DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) measures 100 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB)?
16 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) design files?
From the crazy-giraffe-software/dmxdemonstrator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB) design in my own project?
Yes, under the terms of its GPL-3.0 license, which crazy-giraffe-software chose for the repository.
More boards in dmxdemonstrator
DMX Demonstrator - Transmitter (DMX-TX1)
68.6 × 53.3 mm17 parts2LGPL-3.01
DMX Demonstrator - Receiver (DMX-RX1)
68.6 × 53.3 mm17 parts2LGPL-3.01
DMX Demonstrator - Transmitter IO Module (DMX-TX2)
68.6 × 53.3 mm13 parts2LGPL-3.01
DMX Demonstrator - Control-Pro Clock (DMX-C
100 × 90 mm13 parts2LGPL-3.01
DMX Demonstrator - Display-Pro (DMX-DSP)
57.8 × 58.4 mm12 parts2LGPL-3.01