HardLabs

SharpMemoryLcdBreakout

crehmann·Sharp-Memory-LCD-Breakout·PCB/SharpMemoryLcdBreakout/SharpMemoryLcdBreakout.kicad_pcb

SharpMemoryLcdBreakout PCB layout, top view — open source board by crehmann

About the SharpMemoryLcdBreakout PCB

SharpMemoryLcdBreakout is an open source PCB design by crehmann, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 14 × 42 mm, with 9 components from 6 distinct parts.

By type, the board carries 3 capacitors, 2 connectors, 2 inductors and 2 resistors.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

See the BOM csv file in the release zip-file for LCSC part numbers

See the BOM csv file in the release zip-file for LCSC part numbers

Note: The current revision v0.3 is not tested. v0.2 was using wrong capacitor values but the schematic worked otherwise (see picture).

Assembly: Soldering by hand is doable. The pads for the components are larger for easier soldering. However, for the FPC connecter good equipment and routine is required as it has a pitch of only 0.5mm

SharpMemoryLcdBreakout, from the project README
From the project README

SharpMemoryLcdBreakout bill of materials (BOM)

9 components, 6 distinct parts.

QtyPartRefs
1
Pin Header
J1
1
FH12-10S-0.5SH
J3
2
Ferrite_Bead
FB1, FB2
1
560pF/680pF
C1
2
1uF
C2, C3
2
10kΩ
R1, R2

SharpMemoryLcdBreakout design files

The KiCad project lives in the crehmann/Sharp-Memory-LCD-Breakout repository on GitHub; these links point at the commit this page was built from.

SharpMemoryLcdBreakout: common questions

How big is the SharpMemoryLcdBreakout PCB?

The SharpMemoryLcdBreakout measures 14 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SharpMemoryLcdBreakout?

9 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the SharpMemoryLcdBreakout design files?

From the crehmann/Sharp-Memory-LCD-Breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SharpMemoryLcdBreakout design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which crehmann chose for the repository.

More boards in Sharp-Memory-LCD-Breakout

Similar boards