CR-150-R4b
CrematInc·CR-150-R4b
About the CR-150-R4b PCB
CR-150-R4b is an open source PCB design by CrematInc, published on GitHub under the MIT license. It is a 2-layer board measuring 58.4 × 94 mm, with 33 components from 24 distinct parts.
Other key parts include the CR-11X. By type, the board carries 10 resistors, 9 connectors, 7 capacitors, 4 diodes, 2 transistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
evaluation board for Cremat's charge sensitive preamplifier modules CR-11X
Main components on the CR-150-R4b
CR-150-R4b bill of materials (BOM)
33 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CR-11X | 8pinSIP | U1 |
| 1 | MMBT3904-FDI MMBT3904 | SOT23-3 | Q1 |
| 1 | MMBT3906-FDI MMBT3906 | SOT23-3 | Q2 |
| 1 | detector | SolderPoint | J1 |
| 1 | 538-73138-5033 Test Input | BNC | J2 |
| 1 | 538-73138-5033 Bias In | BNC | J3 |
| 1 | 538-73138-5033 Output | BNC | J4 |
| 1 | 571-2828363 power input | 3-terminal_block | J5 |
| 1 | 164-6218 +12V | banana | J6 |
| 1 | 164-6218 GND | banana | J7 |
| 1 | 164-6218 -12V | banana | J8 |
| 1 | GND | SolderPoint | J9 |
| 2 | MM3Z7V5T1GOS 7.5V | SOD-323 | D1, D2 |
| 2 | 1N4148WS-FDI 1N4148 | SOD-323 | D3, D4 |
| 2 | 75-564R30GASS10 0.01uF | HVcap_on_side | C1, C2 |
| 4 | 1276-1075-2 10uF | 1206 | C3, C4, C6, C7 |
| 1 | 311-1089-2 1pF | 0805 | C5 |
| 1 | 10M | 320 | R1 |
| 1 | 100M | 320 | R2 |
| 2 | A105971 100M | 320 | R3, R10 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | P2.2KA 2.2k | 0805 | R4, R5 |
| 2 | P4.7A 4.7 | 0805 | R6, R7 |
| 1 | P47E 47 | 1206 | R8 |
| 1 | CF14JT10M0 10M | 320 | R9 |
CR-150-R4b design files
The KiCad project lives in the CrematInc/CR-150-R4b repository on GitHub; these links point at the commit this page was built from.
CR-150-R4b: common questions
How big is the CR-150-R4b PCB?
The CR-150-R4b measures 58.4 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CR-150-R4b?
33 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CR-150-R4b design files?
From the CrematInc/CR-150-R4b repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the CR-150-R4b design in my own project?
Yes, under the terms of its MIT license, which CrematInc chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979