HardLabs

Decorative-PCB-Amaia

CrimsonFire1·Decorative-PCB-Amaia·KiCad Files/Decorative PCB for Amaia/Decorative PCB for Amaia.kicad_pcb

Decorative-PCB-Amaia layout, top view — open source AVR/Arduino board by CrimsonFire1

About the Decorative-PCB-Amaia

Decorative-PCB-Amaia is an open source AVR/Arduino PCB design by CrimsonFire1, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 20 components from 13 distinct parts.

Its main chip is the Arduino_Nano_Every, from the AVR/Arduino family. By type, the board carries 9 resistors, 6 diodes, 2 crystals, 1 module, 1 connector and 1 switch.

From the project

Decorative PCB powered by Arduino Nano with LEDs, two piezo buzzers, and a button.

Main components on the Decorative-PCB-Amaia

Arduino_Nano_Every

Decorative-PCB-Amaia bill of materials (BOM)

20 components, 13 distinct parts.

QtyPartRefs
1
Arduino_Nano_Every
A1
2
Piezo
Y1, Y2
1
Conn_01x02_Pin
J1
1
Button
SW1
1
LED Dim A
D1
1
LED Dim B
D2
1
LED Dim C
D3
1
LED X
D4
1
LED Y
D5
1
LED Z
D6
2
100
R1, R2
1
10k
R3
6
200
R4, R5, R6, R7, R8, R9

Decorative-PCB-Amaia design files

The KiCad project lives in the CrimsonFire1/Decorative-PCB-Amaia repository on GitHub; these links point at the commit this page was built from.

Decorative-PCB-Amaia: common questions

What microcontroller does the Decorative-PCB-Amaia use?

The Decorative-PCB-Amaia is built around the Arduino_Nano_Every, from the AVR/Arduino family.

How big is the Decorative-PCB-Amaia?

The Decorative-PCB-Amaia measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Decorative-PCB-Amaia?

20 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Decorative-PCB-Amaia design files?

From the CrimsonFire1/Decorative-PCB-Amaia repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Decorative-PCB-Amaia design in my own project?

The repository has no license, so all rights stay with CrimsonFire1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Decorative-PCB-Amaia without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards