HardLabs

Cgranja piscineElec design

Croco41·BootcampElec·projects/TEST_KICAD1/TEST_KICAD1.kicad_pcb

Cgranja piscineElec design PCB layout, top view — open source AVR/Arduino board by Croco41

About the Cgranja piscineElec design PCB

Cgranja piscineElec design is an open source AVR/Arduino PCB design by Croco41, published on GitHub. It is a 2-layer board measuring 37 × 41 mm, with 17 components from 9 distinct parts.

Its main chip is the ATmega328P-A, from the AVR/Arduino family. By type, the board carries 6 capacitors, 3 connectors, 3 resistors, 2 diodes, 1 IC and 1 crystal.

From the project

Petite carte basée sur un ATmega328P-AU 16 MHz

Petite carte basée sur un ATmega328P-AU 16 MHz

Connecteur 1×6, compatible FTDI standard Pro Mini. De GND vers DTR 6. GND 5. GND / CTS (suivant le module FTDI) 4. VCC (5 V) 3. RXI (vers D0 du µC) 2. TXO (depuis D1 du µC) 1. DTR (reset auto via condensateur vers RESET)

1. RAW – entrée VIN non régulée (5–12 V) 2. GND – masse 3. RST – reset actif bas 4. VCC – 5 V régulé 5. A3 – PC3 / ADC3 6. A2 – PC2 / ADC2 7. A1 – PC1 / ADC1 8. A0 – PC0 / ADC0 9. D13 / SCK – PB5, SPI clock, LED verte D1 10. D12 / MISO – PB4, SPI MISO 11. D11 / MOSI – PB3, SPI MOSI 12. D10 / SS – PB2, SPI SS / PWM

Main components on the Cgranja piscineElec design

ATmega328P-A

Cgranja piscineElec design bill of materials (BOM)

17 components, 9 distinct parts.

QtyPartRefs
1
ATmega328P-A
U1
1
Crystal
Y1
1
~
J1
1
~
J2
1
FTDI
J3
1
SW_Push
SW1
2
LED
D1, D2
6
C
C1, C2, C3, C4, C5, C6
3
R
R1, R2, R3

Cgranja piscineElec design design files

The KiCad project lives in the Croco41/BootcampElec repository on GitHub; these links point at the commit this page was built from.

Cgranja piscineElec design: common questions

What microcontroller does the Cgranja piscineElec design use?

The Cgranja piscineElec design is built around the ATmega328P-A, from the AVR/Arduino family.

How big is the Cgranja piscineElec design PCB?

The Cgranja piscineElec design measures 37 × 41 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cgranja piscineElec design?

17 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cgranja piscineElec design design files?

From the Croco41/BootcampElec repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Cgranja piscineElec design design in my own project?

The repository has no license, so all rights stay with Croco41. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cgranja piscineElec design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in BootcampElec

Similar boards