HardLabs

Cgranja piscineElec design

Croco41·RENDU_BOOTCAMP_ELEC_CGRANJA·DESIGN/TEST_KICAD1/TEST_KICAD1.kicad_pcb

Cgranja piscineElec design PCB layout, top view — open source AVR/Arduino board by Croco41

About the Cgranja piscineElec design PCB

Cgranja piscineElec design is an open source AVR/Arduino PCB design by Croco41, published on GitHub. It is a 2-layer board measuring 37 × 41 mm, with 17 components from 9 distinct parts.

Its main chip is the ATmega328P-A, from the AVR/Arduino family. By type, the board carries 6 capacitors, 3 connectors, 3 resistors, 2 diodes, 1 IC and 1 crystal.

From the project

Rendu des 2 projets DESIGN et PROTOTYPAGE/SOUDURE

Petite carte basée sur un ATmega328P-AU 16 MHz

Connecteur 1×6, compatible FTDI standard Pro Mini. De GND vers DTR:

6- GND 5- GND / CTS (suivant le module FTDI) 4- VCC (5 V) 3- RXI (vers D0 du µC) 2- TXO (depuis D1 du µC) 1- DTR (reset auto via condensateur vers RESET)

1. RAW – entrée VIN non régulée (5–12 V) 2. GND – masse 3. RST – reset actif bas 4. VCC – 5 V régulé 5. A3 – PC3 / ADC3 6. A2 – PC2 / ADC2 7. A1 – PC1 / ADC1 8. A0 – PC0 / ADC0 9. D13 / SCK – PB5, SPI clock, LED verte D1 10. D12 / MISO – PB4, MISO 11. D11 / MOSI – PB3, MOSI 12. D10 / SS – PB2, SS / PWM

Main components on the Cgranja piscineElec design

ATmega328P-A

Cgranja piscineElec design bill of materials (BOM)

17 components, 9 distinct parts.

QtyPartRefs
1
ATmega328P-A
U1
1
Crystal
Y1
1
~
J1
1
~
J2
1
FTDI
J3
1
SW_Push
SW1
2
LED
D1, D2
6
C
C1, C2, C3, C4, C5, C6
3
R
R1, R2, R3

Cgranja piscineElec design design files

The KiCad project lives in the Croco41/RENDU_BOOTCAMP_ELEC_CGRANJA repository on GitHub; these links point at the commit this page was built from.

Cgranja piscineElec design: common questions

What microcontroller does the Cgranja piscineElec design use?

The Cgranja piscineElec design is built around the ATmega328P-A, from the AVR/Arduino family.

How big is the Cgranja piscineElec design PCB?

The Cgranja piscineElec design measures 37 × 41 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cgranja piscineElec design?

17 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cgranja piscineElec design design files?

From the Croco41/RENDU_BOOTCAMP_ELEC_CGRANJA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Cgranja piscineElec design design in my own project?

The repository has no license, so all rights stay with Croco41. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cgranja piscineElec design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RENDU_BOOTCAMP_ELEC_CGRANJA

Similar boards