HypaLoc
About the HypaLoc PCB
HypaLoc is an open source PCB design by crteensy, published on GitHub under the MIT license. It is a 4-layer board measuring 10 × 12 mm, with 23 components from 18 distinct parts.
Other key parts include the NCP160xMX, MMC3416xPJ and ZOE-M8Q. By type, the board carries 8 capacitors, 6 test points, 3 ICs, 3 resistors, 2 diodes and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
A tiny GNSS/magnetometer combo
Main components on the HypaLoc
HypaLoc bill of materials (BOM)
23 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP160xMX | OnSemi-XDFN-4-1EP_1x1mm_P0.65mm_EP0.52x0.52mm | U1 |
| 1 | MMC3416xPJ | BGA-12_4x4_1.6x1.6mm | U2 |
| 1 | ZOE-M8Q | ZOE-M8 | U3 |
| 1 | Ant | U.FL_Molex_MCRF_73412-0110_Vertical | J1 |
| 1 | Vin | pad_1x1.5 | TP2 |
| 1 | SDA | pad_1x1.5 | TP3 |
| 1 | SCL | pad_1x1.5 | TP4 |
| 1 | GNSS_Tx | pad_1x1.5 | TP5 |
| 1 | GNSS_Rx | pad_1x1.5 | TP6 |
| 1 | Gnd | pad_1x1.5 | TP7 |
| 1 | green | LED_0201_0603Metric | D1 |
| 1 | CDBQC0130L-HF | D_SOD-932F_0402_1005Metric | D2 |
| 2 | 1u | C_0402_1005Metric | C1, C2 |
| 2 | 100u | CP_EIA-3216-18_Kemet-A | C3, C6 |
| 3 | 1u | C_0201_0603Metric_mod | C4, C7, C8 |
| 1 | 4u7 | C_0402_1005Metric | C5 |
| 1 | 360R | R_0201_0603Metric_mod | R1 |
| 2 | 2k7 | R_0201_0603Metric_mod | R2, R3 |
HypaLoc design files
The KiCad project lives in the crteensy/HypaLoc repository on GitHub; these links point at the commit this page was built from.
- LayoutHypaLoc.kicad_pcb
- SchematicHypaLoc.kicad_sch
HypaLoc: common questions
How big is the HypaLoc PCB?
The HypaLoc measures 10 × 12 mm, has 4 copper layers and is 1 mm thick.
How many components are on the HypaLoc?
23 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the HypaLoc design files?
From the crteensy/HypaLoc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HypaLoc design in my own project?
Yes, under the terms of its MIT license, which crteensy chose for the repository.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568