Stm32l4-heater
CSpyridakis·stm32l4-heater·pcb/stm32l4-heater/stm32l4-heater.kicad_sch

About the Stm32l4-heater PCB
Stm32l4-heater is an open source STM32 PCB design by CSpyridakis, published on GitHub under the MIT license. It is a board, with 56 components from 32 distinct parts.
Its main chip is the STM32L412K8Ux, from the STM32 family. Other key parts include the L7805, AMS1117-3.3, NSL-32 and TLP3022. By type, the board carries 15 capacitors, 13 resistors, 12 diodes, 6 ICs, 4 connectors and 2 test points.
From the project
A STM32 based closed-loop control system
In order to control the component, a zero crossing approach is used to set the durations open of a TRIAC.
In a real-world application, considering the fact that an STM32L4 is occasionally used in low-power applications, most probably a SMPS should be considered to power the PCB, since the power would likely be one requirement that needs to be concerned about.
Main components on the Stm32l4-heater
Stm32l4-heater bill of materials (BOM)
56 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | U1 | |
| 1 | STM32L412K8Ux | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U2 |
| 1 | ~ | U3 | |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | NSL-32 | Luna_NSL-32 | U5 |
| 1 | TLP3022 | Toshiba_11-7A9 | U6 |
| 1 | 8Mhz | Oscillator_DIP-14 | X1 |
| 1 | Barrel_Jack | J1 | |
| 2 | Screw_Terminal_01x03 | J2, J5 | |
| 1 | Conn_01x04_Socket | J3 | |
| 1 | Fuse | F1 | |
| 1 | Transformer_1P_1S | T1 | |
| 2 | TestPoint | TP1, TP2 | |
| 10 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D7, D8, D9 +2 |
| 1 | LED | D6 | |
| 1 | Q_TRIAC_GA1A2 | D11 | |
| 1 | 120R | FB1 | |
| 1 | C_Polarized | C1 | |
| 1 | 0u33 | C2 | |
| 5 | 100n | C3, C5, C7, C8, C14 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0u1 | C4, C6 | |
| 1 | 10u | C10 | |
| 1 | 10n | C11 | |
| 2 | 1u | C12, C13 | |
| 2 | 22u | C17, C18 | |
| 3 | 10K | R1, R5, R13 | |
| 3 | 1K5 | R2, R3, R4 | |
| 2 | 47K | R6, R7 | |
| 1 | Rled | R8 | |
| 1 | 1K | R9 | |
| 2 | 22 | R10, R11 | |
| 1 | 100 | R12 |
Stm32l4-heater design files
The KiCad project lives in the CSpyridakis/stm32l4-heater repository on GitHub; these links point at the commit this page was built from.
Stm32l4-heater: common questions
What microcontroller does the Stm32l4-heater use?
The Stm32l4-heater is built around the STM32L412K8Ux, from the STM32 family.
How many components are on the Stm32l4-heater?
56 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32l4-heater design files?
From the CSpyridakis/stm32l4-heater repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Stm32l4-heater design in my own project?
Yes, under the terms of its MIT license, which CSpyridakis chose for the repository.
Can I test firmware for the Stm32l4-heater without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k