Kicad display breakout example

Cuprum77·kicad-display-breakout-example

Kicad display breakout example layout, top view — open source board by Cuprum77

About the Kicad display breakout example

Kicad display breakout example is an open source PCB design by Cuprum77, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 33.5 × 47.8 mm, with 9 components from 7 distinct parts.

By type, the board carries 3 capacitors, 3 resistors, 1 transistor and 1 connector.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

Example of the kicad-display symbol repository being used to create a breakout board

This repository contains a simple breakout board for a 1.69" IPS LCD with capacitive touch, and serves as an example of the KiCad project structure.

It was intended to be used with the following display from AliExpress, however this flat-flex cable is not solderable, and requires a FPC connector to be soldered onto the PCB. This was originally an oversight on my part, and the PCB that was produced did not feature this footprint, which required manual rework of soldering individual wires directly to the FPC. This version should be fixed, although it has never been produced.

Kicad display breakout example bill of materials (BOM)

9 components, 7 distinct parts.

QtyPartRefs
1
BC817
Q1
1
Conn_01x12
J1
1
1.69" Touch LCD
DS1
3
100n
C1, C2, C3
1
1k
R1
1
10k
R2
1
0
R3

Kicad display breakout example design files

The KiCad project lives in the Cuprum77/kicad-display-breakout-example repository on GitHub; these links point at the commit this page was built from.

Kicad display breakout example: common questions

How big is the Kicad display breakout example?

The Kicad display breakout example measures 33.5 × 47.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kicad display breakout example?

9 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad display breakout example design files?

From the Cuprum77/kicad-display-breakout-example repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kicad display breakout example design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which Cuprum77 chose for the repository.

Similar boards