Altimeter
cuspaceflight·altimeter·pcb/altimeter.kicad_pcb
About the Altimeter PCB
Altimeter is an open source STM32 PCB design by cuspaceflight, published on GitHub. It is a 2-layer board measuring 18 × 86 mm, with 52 components from 26 distinct parts.
Its main chip is the STM32F411CxUx, from the STM32 family. Other key parts include the MS5611-01BA03, ADP1607 and MICROSD. By type, the board carries 17 capacitors, 15 resistors, 6 test points, 4 ICs, 3 crystals and 2 connectors.
From the project
Barebones altimeter for small rockets
1. Setup the repository using the following commands:
2. To succesfully compile firmware you will need to install gcc:
3. Test the installation by compiling the firmware template:
1. Copy the file "log_0000x.bin" you wish to decode into the altimeter/logs directory
The output will print directly to the terminal window.
This will be explained in depth in the sessions, however the files which you will want to modify (status.c, measurements.c and logging.c) can be found in the altimeter/firmware directory.
Main components on the Altimeter
Altimeter bill of materials (BOM)
52 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MS5611-01BA03 | MS5611 | IC1 |
| 1 | ADP1607 | LFCSP-2x2 | IC2 |
| 1 | STM32F411CxUx | QFN-48-EP-ST | IC3 |
| 1 | MICROSD | MICROSD_MOLEX_503398-1892 | U1 |
| 1 | NFET | SOT-23 | Q1 |
| 2 | M3 Hole | M3_MOUNT | X1, X2 |
| 1 | 26MHz | XTAL-20x16 | Y1 |
| 1 | BATT | KEYSTONE2460 | J1 |
| 1 | SWD_TC | TC2030-NL | P1 |
| 1 | SOUNDER | AI-1027-TWT-3V-R | LS1 |
| 6 | TESTPAD | TESTPAD | TP1, TP2, TP3, TP5, TP6, TP7 |
| 2 | LED | 0603-LED | D1, D2 |
| 1 | 2.2uH | VLF252012MT | L1 |
| 9 | 100nF | 0402 | C1, C5, C6, C9, C11, C13, C14, C15 +1 |
| 2 | 10uF | 0805 | C2, C3 |
| 1 | 100n | 0603-L | C4 |
| 2 | 8pF | 0402-L | C7, C8 |
| 2 | 4.7uF | 0402 | C10, C12 |
| 1 | 1uF | 0402 | C17 |
| 5 | 47k | 0603-L | R1, R3, R5, R7, R8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100R | 0402 | R2, R4, R6 |
| 1 | 243k | 0603-L | R9 |
| 2 | 10k | 0402 | R10, R12 |
| 1 | 330k | 0603-L | R11 |
| 2 | 120R | 0603-L | R13, R14 |
| 1 | 100R | 0402-L | R15 |
Altimeter design files
The KiCad project lives in the cuspaceflight/altimeter repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/altimeter.kicad_pcb
Altimeter: common questions
What microcontroller does the Altimeter use?
The Altimeter is built around the STM32F411CxUx, from the STM32 family.
How big is the Altimeter PCB?
The Altimeter measures 18 × 86 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Altimeter?
52 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Altimeter design files?
From the cuspaceflight/altimeter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Altimeter design in my own project?
The repository has no license, so all rights stay with cuspaceflight. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Altimeter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in altimeter
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k