Panel altimeter

cuspaceflight·altimeter·pcb/panel/panel_altimeter.kicad_pcb

Panel altimeter PCB layout, top view — open source STM32 board by cuspaceflight

About the Panel altimeter PCB

Panel altimeter is an open source STM32 PCB design by cuspaceflight, published on GitHub. It is a 2-layer board measuring 7 × 40 mm, with 52 components from 26 distinct parts.

Its main chip is the STM32F411CxUx, from the STM32 family. Other key parts include the MS5611-01BA03, ADP1607 and MICROSD. By type, the board carries 17 capacitors, 15 resistors, 6 test points, 4 ICs, 3 crystals and 2 connectors.

From the project

Barebones altimeter for small rockets

1. Setup the repository using the following commands:

2. To succesfully compile firmware you will need to install gcc:

3. Test the installation by compiling the firmware template:

1. Copy the file "log_0000x.bin" you wish to decode into the altimeter/logs directory

The output will print directly to the terminal window.

This will be explained in depth in the sessions, however the files which you will want to modify (status.c, measurements.c and logging.c) can be found in the altimeter/firmware directory.

Main components on the Panel altimeter

Panel altimeter bill of materials (BOM)

52 components, 26 distinct parts.

QtyPartRefs
1
MS5611-01BA03
IC1
1
ADP1607
IC2
1
STM32F411CxUx
IC3
1
MICROSD
U1
1
NFET
Q1
2
M3 Hole
X1, X2
1
26MHz
Y1
1
BATT
J1
1
SWD_TC
P1
1
SOUNDER
LS1
6
TESTPAD
TP1, TP2, TP3, TP5, TP6, TP7
2
LED
D1, D2
1
2.2uH
L1
9
100nF
C1, C5, C6, C9, C11, C13, C14, C15 +1
2
10uF
C2, C3
1
100n
C4
2
8pF
C7, C8
2
4.7uF
C10, C12
1
1uF
C17
5
47k
R1, R3, R5, R7, R8
Show 6 more
QtyPartRefs
3
100R
R2, R4, R6
1
243k
R9
2
10k
R10, R12
1
330k
R11
2
120R
R13, R14
1
100R
R15

Panel altimeter design files

The KiCad project lives in the cuspaceflight/altimeter repository on GitHub; these links point at the commit this page was built from.

Panel altimeter: common questions

What microcontroller does the Panel altimeter use?

The Panel altimeter is built around the STM32F411CxUx, from the STM32 family.

How big is the Panel altimeter PCB?

The Panel altimeter measures 7 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel altimeter?

52 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panel altimeter design files?

From the cuspaceflight/altimeter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Panel altimeter design in my own project?

The repository has no license, so all rights stay with cuspaceflight. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Panel altimeter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in altimeter

Similar boards