21 open source boards using the MS5611-01BA03
Real designs built with the MS5611-01BA03, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
R1 panel
cuspaceflight
50 × 50 mm176 parts2LNo license93STM32
Spalax
cuspaceflight
77.2 × 49.8 mm73 parts2LNo license11ESP32
Crazyflie control board
sPyOpenSource
40.1 × 38.1 mm92 parts4LMIT8STM32
M2fc
cuspaceflight
100 × 70 mm348 parts4LNo license5- schematic only · 170 parts
Yatagarasu red
DCoJA
170 partsCC-BY-SA-4.05 STM32
Avionics14
cuspaceflight
89.5 × 48 mm110 parts2LNo license4STM32
Fpv drone
AQUA-Warrior
37 × 37 mm106 parts4LCC-BY-SA-4.02ESP32
DroneMagNav2.0
ajisrawi
128 × 84 mm218 parts4LCustom license0STM32
Maru x21
donghee
51 × 31.5 mm181 parts4LNo license0ESP32
ESP-32 Based Avionics and Telemetry Board
devjamescollier
50 × 80 mm95 parts4LCERN-OHL-P-2.00ESP32
ESP-32 Based Avionics Telemetry Board
devjamescollier
50 × 80 mm95 parts4LCERN-OHL-P-2.00STM32
Altimeter
cuspaceflight
18 × 86 mm52 parts2LNo license0STM32
Flight data recorder
alexdortiz
57 × 27 mm47 parts4LMIT0STM32
Woodchuck
cuspaceflight
58 × 35 mm38 parts2LMIT0IMU BREAKOUT BOARD
riccardo-ops
50.5 × 38.5 mm23 parts4LNo license0- schematic only · 70 partsESP32
Kicad
maximiliano280311
70 partsNo license0 ESP32
MIDAS MK1
ISSUIUC
60 × 100 mm201 parts4LNo license31STM32
Panel altimeter
cuspaceflight
7 × 40 mm52 parts2LNo license0STM32
QUT AutoPilot SensorTest board
Heckus
71.5 × 46 mm40 parts2LCustom license0ESP32
MIDAS MK1.1
ISSUIUC
60 × 100 mm199 parts4LNo license31ESP32
MIDAS MK2.1
ISSUIUC
45 × 100 mm186 parts4LNo license31
How designs wire the MS5611-01BA03
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the MS5611-01BA03 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 12 of 16 designs, most often 100 nF (then 10 nF).
- The PS pin is tied to GND on 11 of 16 designs (3.3V on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 100% |
|
| PSpin 2 | Connected to: GND 69% · 3.3V 25% | — |
| GNDpin 3 | Connected to: GND 100% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include R1 panel by cuspaceflight, MIDAS MK1 by ISSUIUC, Spalax by cuspaceflight and Crazyflie control board by sPyOpenSource.
The MS5611-01BA03 in open source designs
The gallery holds 21 open source boards using the MS5611-01BA03 from 18 GitHub repositories; a typical one measures about 51 × 49.8 mm and carries around 95 components.
63% use four copper layers or more, and 33% carry an open source license.
The most starred is R1 panel by cuspaceflight.
Parts used alongside the MS5611-01BA03
What boards using the MS5611-01BA03 are built for
MS5611-01BA03: common questions
Where can I find a MS5611-01BA03 reference design?
Each of the 21 boards on this page is a real design using the MS5611-01BA03. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MS5611-01BA03 VDD pin?
The VDD pin has a decoupling capacitor on 12 of 16 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 16 open source designs using the MS5611-01BA03.
How is the MS5611-01BA03 PS pin connected?
The PS pin is tied to GND on 11 of 16 designs (3.3V on 4). Counted from the KiCad layouts of 16 open source designs using the MS5611-01BA03.
What parts are used alongside the MS5611-01BA03?
The USBLC6-2SC6, ADP3335, ADXL345, HMC5883L and LIS3MDLTR appear in the most repositories here.
Which microcontrollers do boards using the MS5611-01BA03 use?
Most are built on STM32 (11) and ESP32 (8).
How big is a typical board using the MS5611-01BA03?
The median is 51 × 49.8 mm, and 37% are two-layer designs.
What is the most popular open source board using the MS5611-01BA03?
By GitHub stars, R1 panel by cuspaceflight, with 93 stars.
Can I simulate one of these boards using the MS5611-01BA03 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.