Rpi3FanHatPlus
cvaldess·Rpi3FanHatPlus·HATPlus/HAT+.kicad_pcb
About the Rpi3FanHatPlus PCB
Rpi3FanHatPlus is an open source PCB design by cvaldess, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 65 × 56.5 mm, with 31 components from 18 distinct parts.
Other key parts include the AT24CS64-SSHM-B and EMC2303-1-KP-TR. By type, the board carries 14 resistors, 6 connectors, 4 capacitors, 3 transistors, 2 ICs and 1 fuse.
It belongs with the dev boards & breakouts and rf & radio designs in this gallery.
From the project
Raspberry Pi 5 HAT+: EMC2303 controller for 3 case fans + GNSS (UART/PPS) breakout. KiCad 10, CERN-OHL-S v2.
Raspberry Pi 5 HAT+ that drives the three fans of a case with a Microchip EMC2303 fan controller and breaks out the Pi's UART and a PPS input for a GNSS module (J2).
- EMC2303 I²C fan controller on the Pi's I²C1 bus (address 0x2E, ALERT on GPIO5). - Fan 1 / Fan 2 (J5, J6): standard 4-pin PWM fans with tachometer, e.g. Noctua NF-A4x10 PWM (12 V). - Fan 3 (J4): small 2-wire 12 V fan (up to 100 mA) that cools the GNSS module, switched on the low side by an AO3400A MOSFET with an SS14 flyback diode. - GNSS connector (J2): connects a GNSS module (a Unicore UM982 in this build) to the Raspberry…
Main components on the Rpi3FanHatPlus
Rpi3FanHatPlus bill of materials (BOM)
31 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT24CS64-SSHM-B AT24CS64-SSHM MICROCHIP | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | EMC2303-1-KP-TR MICROCHIP(美国微芯) | TQFN-12_L4.0-W4.0-P0.80-BL-EP2.1_PasteGrid | U3 |
| 2 | 2N7002 JSCJ | SOT-23 | Q4, Q5 |
| 1 | AO3400A Alpha & Omega Semicon | SOT-23 | Q6 |
| 1 | HLE-120-02-F-DV-BE-A RPi_40Pin Samtec | Samtec_HLE-120-02-xxx-DV-BE-A_2x20_P2.54mm_Horizontal_Reverse | J1 |
| 1 | PZ254R-12-12P GNSS XFCN | PinHeader_2x06_P2.54mm_Horizontal | J2 |
| 1 | PZ254R-11-02P 12V XFCN | PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | PZ254R-11-02P Fan3 XFCN | PinHeader_1x02_P2.54mm_Horizontal | J4 |
| 1 | 47053-1000 FAN1 Molex | FanPinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 47053-1000 FAN2 Molex | FanPinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | ASMD1206-050-30V 0.5A JDTfuse | Fuse_1206_3216Metric | F1 |
| 1 | SS14 MDD(Microdiode Semiconductor) | SMA_L4.3-W2.6-LS5.1-RD | D1 |
| 3 | CC0603KRX7R9BB104 100n 50V Yageo | C_0603_1608Metric | C1, C2, C3 |
| 1 | CL31A106KBHNNNE 10u 50V Samsung Electro-Mechanics | C_1206_3216Metric | C4 |
| 4 | HRC0603F3901ENTN 3.9k HWA CHN | R_0603_1608Metric | R1, R2, R3, R4 |
| 7 | HRC0603F4701ENTN 4.7K HWA CHN | R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R11 |
| 2 | HRC0603F2201ENTN 2.2K HWA CHN | R_0603_1608Metric | R12, R13 |
| 1 | 0603WAF1002T5E 10K UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric | R14 |
Rpi3FanHatPlus design files
The KiCad project lives in the cvaldess/Rpi3FanHatPlus repository on GitHub; these links point at the commit this page was built from.
Rpi3FanHatPlus: common questions
How big is the Rpi3FanHatPlus PCB?
The Rpi3FanHatPlus measures 65 × 56.5 mm, has 4 copper layers and is 1.616 mm thick.
How many components are on the Rpi3FanHatPlus?
31 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rpi3FanHatPlus design files?
From the cvaldess/Rpi3FanHatPlus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rpi3FanHatPlus design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which cvaldess chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979