Central power board
cvra·central-power-board
About the Central power board
Central power board is an open source PCB design by cvra, published on GitHub. It is a 2-layer board measuring 51 × 67 mm, with 43 components from 19 distinct parts.
Other key parts include the LTC2952_TSSOP20 and R-555.0PA. By type, the board carries 14 capacitors, 12 resistors, 7 connectors, 4 transistors, 2 ICs and 2 fuses.
It belongs with the robotics & motion designs in this gallery.
From the project
Power board used to distribute power in CVRA robots
Main components on the Central power board
Central power board bill of materials (BOM)
43 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC2952_TSSOP20 | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 1 | R-555.0PA | DCDC-Conv_Recom_R-5xxxPA | U2 |
| 4 | Si7997DP | PowerPak-SO8_5.15x6.15mm_Pitch1.27mm | Q1, Q2, Q3, Q4 |
| 1 | Picoblade | Molex-PicoBlade-8 | P1 |
| 3 | PT 1,5/ 2-3,5-H | Bornier_2p_3.5H | P2, P3, P6 |
| 2 | MKKDS 1/ 3-3,5 | _Pheonix_MKKDS-1-3-3.5mm | P4, P7 |
| 1 | MKKDS 1/ 5-3,5 | _Pheonix_MKKDS-1-5-3.5mm | P5 |
| 1 | Buzzer | _Buzzer_PUIAudio_AI-1433-TWT-R | BZ1 |
| 2 | 20A | FuseHolder-Keystone-3557-2 | F1, F2 |
| 1 | LL103C-GS08 | D_MiniMELF_Standard | D1 |
| 2 | NC | _0603 | C1, C3 |
| 3 | 1nF | _0603 | C2, C8, C9 |
| 3 | 47nF | _0603 | C4, C10, C11 |
| 1 | 0.1uF | _0603 | C5 |
| 4 | 100uF | CP_Radial_D8.0mm_P3.50mm | C6, C7, C13, C14 |
| 1 | 3.3mF | CP_Radial_L31.50D16.00P7.50_H | C12 |
| 2 | 1k | _0603 | R1, R2 |
| 6 | 100k | _0603 | R3, R4, R9, R10, R11, R12 |
| 4 | R | _0603 | R5, R6, R7, R8 |
Central power board design files
The KiCad project lives in the cvra/central-power-board repository on GitHub; these links point at the commit this page was built from.
Central power board: common questions
How big is the Central power board?
The Central power board measures 51 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Central power board?
43 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Central power board design files?
From the cvra/central-power-board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Central power board design in my own project?
The repository has no license, so all rights stay with cvra. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979