I n c u r v5
About the I n c u r v5 PCB
I n c u r v5 is an open source Raspberry Pi PCB design by cyberboy666, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 30 components from 14 distinct parts.
Its main chip is the 485-1979, from the Raspberry Pi family. Other key parts include the A-2470 and 859-6N138. By type, the board carries 9 diodes, 8 connectors, 7 resistors and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
a r_e_c_u_r video sampler extension circuit - adding knobs, cv and serial midi control
- this circuit is distributed by UNDERSCORES - an open video hardware label : it is available to purchase - as a pcb, kit or assembled unit - at underscores.shop - the schematic for the circuit can be found here - the pcb gerber files for the lastest version can be found here - interactive BOM is here - consider donating to the underscores project to help us continue creating for the commons
Main components on the I n c u r v5
I n c u r v5 bill of materials (BOM)
30 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A-2470 MCP3008 tayda | DIP-16_W7.62mm_LongPads | U1 |
| 1 | 859-6N138 6N138 mouser | DIP-8_W7.62mm_LongPads | U2 |
| 4 | A-2563 mono_jack_3.5mm tayda | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J2, J3, J4 |
| 1 | 490-SD-50BV din5 mouser | tht_vertical_din5 | J5 |
| 1 | - Conn_01x01 - | Pin_Header_Straight_1x01_Pitch2.54mm | J6 |
| 1 | 490-RCJ-024 rca mouser | tht_rca_vertical | J7 |
| 1 | 485-1979 2x20_Extra_Tall_Header mouser | PinHeader_2x20_P2.54mm_Vertical | J8 |
| 4 | A-5531 10k_pot tayda | tht_vertical_potentiometer | RV1, RV2, RV3, RV4 |
| 8 | A-1095 BAT46 tayda | D_DO-35_SOD27_P5.08mm_Vertical_KathodeUp | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | A-157 1N4148 tayda | D_DO-35_SOD27_P5.08mm_Vertical_KathodeUp | D9 |
| 4 | A-2200 1K tayda | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 1 | A-2246 220 tayda | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | A-2248 100K tayda | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | A-2247 470 tayda | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
I n c u r v5 design files
The KiCad project lives in the cyberboy666/i_n_c_u_r repository on GitHub; these links point at the commit this page was built from.
I n c u r v5: common questions
What microcontroller does the I n c u r v5 use?
The I n c u r v5 is built around the 485-1979, from the Raspberry Pi family.
How big is the I n c u r v5 PCB?
The I n c u r v5 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I n c u r v5?
30 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the I n c u r v5 design files?
From the cyberboy666/i_n_c_u_r repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the I n c u r v5 design in my own project?
Yes, under the terms of its GPL-3.0 license, which cyberboy666 chose for the repository.
Can I test firmware for the I n c u r v5 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry PiHaxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license672
Raspberry PiDesktop 50 Pin TopConn
BlueSCSI
89.2 × 82.6 mm103 parts2LGPL-3.0449
Raspberry PiPowerBook
74.5 × 56.3 mm78 parts2LGPL-3.0449
Raspberry PiBitDogLab 5.4
BitDogLab
87.9 × 123.9 mm56 parts2LCERN-OHL-S-2.0201
Raspberry PiBitDogLab Main SMD version
87.9 × 98.7 mm124 parts2LCERN-OHL-S-2.0201
Raspberry PiZynthian mini v2 20 buttons short
zynthian
163 × 120 mm87 parts2LNo license154