Gate PCB's
About the Gate PCB's
Gate PCB's is an open source PCB design by d0n13, published on GitHub under the MIT license. It is a 2-layer board measuring 88 × 82 mm, with 35 components from 23 distinct parts.
Other key parts include the MCP23009-E/SS. By type, the board carries 17 connectors, 10 resistors, 3 transistors, 1 IC, 1 relay and 1 switch.
From the project
Homebridge accessories
Main components on the Gate PCB's
Gate PCB's bill of materials (BOM)
35 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23009-E/SS MCP23009-E_SS | SOP65P780X200-20N | IC1 |
| 3 | FDC6561AN | SSOT-6 | Q1, Q2, Q3 |
| 1 | CN7 | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J3 |
| 1 | CN1 | Gate_Connector_2022 | J4 |
| 4 | RJ45_Shielded | RJ45_Amphenol_RJHSE5380 | J5, J6, J16, J17 |
| 1 | AUX | TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J7 |
| 2 | AUX | JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J8, J11 |
| 1 | Power | JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J12 |
| 1 | Fiber Power | JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J13 |
| 1 | Driveway lights | JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J14 |
| 1 | POE Camera | RJ45_Amphenol_RJHSE5380 | J15 |
| 1 | Ethernet | RJ45_Amphenol_RJHSE5380 | J18 |
| 1 | Pi | JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J20 |
| 1 | Post | JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J22 |
| 1 | pi | PinSocket_2x10_P2.54mm_Vertical_SMD | P1 |
| 1 | EC2-5SNU | Relay_DPDT_Kemet_EC2 | K1 |
| 1 | START | TS-D015 | SW1 |
| 1 | STD40NF10 | D_PAK | T1 |
| 1 | 0.1uF | C_1206_3216Metric | C1 |
| 1 | 1K | R_1206_3216Metric | R1 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 15K | R_1206_3216Metric | R2 |
| 6 | 10k | R_1206_3216Metric | R3, R4, R5, R6, R7, R8 |
| 2 | 1.8K | R_1206_3216Metric | R9, R10 |
Gate PCB's design files
The KiCad project lives in the d0n13/automation repository on GitHub; these links point at the commit this page was built from.
Gate PCB's: common questions
How big is the Gate PCB's?
The Gate PCB's measures 88 × 82 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gate PCB's?
35 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gate PCB's design files?
From the d0n13/automation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gate PCB's design in my own project?
Yes, under the terms of its MIT license, which d0n13 chose for the repository.
More boards in automation
Raspberry PiGarage door opener with dual relay output
65 × 30 mm19 parts2LMIT0
Raspberry PiRaspberry Pi® Zero W - Hat Template
65 × 30 mm10 parts2LMIT0
Driveway dual op
29.5 × 27.5 mm10 parts2LMIT0
1-wire driveway
58.4 × 44.5 mm9 parts2LMIT0
Driveway op+in
29.5 × 28.7 mm7 parts2LMIT0