Raspberry Pi® Zero W - Hat Template
About the Raspberry Pi® Zero W - Hat Template
Raspberry Pi® Zero W - Hat Template is an open source Raspberry Pi PCB design by d0n13, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 30 mm, with 10 components from 8 distinct parts.
Its main chip is the Raspberry Pi, from the Raspberry Pi family. By type, the board carries 3 resistors, 2 connectors, 2 diodes, 1 transistor and 1 relay.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Homebridge accessories
Raspberry Pi® Zero W - Hat Template bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FDC6561AN | SSOT-6 | Q1 |
| 1 | Raspberry Pi | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | TerminalBlock_bornier-4_P5.08mm | J2 |
| 1 | EC2-5SNU | Relay_DPDT_Kemet_EC2 | K1 |
| 1 | IRM-02-5 | Converter_ACDC_MeanWell_IRM-02-xx_THT | PS1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | 55 | R_0805_2012Metric | R2, R3 |
Raspberry Pi® Zero W - Hat Template design files
The KiCad project lives in the d0n13/automation repository on GitHub; these links point at the commit this page was built from.
Raspberry Pi® Zero W - Hat Template: common questions
What microcontroller does the Raspberry Pi® Zero W - Hat Template use?
The Raspberry Pi® Zero W - Hat Template is built around the Raspberry Pi, from the Raspberry Pi family.
How big is the Raspberry Pi® Zero W - Hat Template?
The Raspberry Pi® Zero W - Hat Template measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Raspberry Pi® Zero W - Hat Template?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Raspberry Pi® Zero W - Hat Template design files?
From the d0n13/automation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Raspberry Pi® Zero W - Hat Template design in my own project?
Yes, under the terms of its MIT license, which d0n13 chose for the repository.
Can I test firmware for the Raspberry Pi® Zero W - Hat Template without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in automation
Similar boards
Raspberry PiOpen source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7k
Raspberry PiIot
dotnet
56 × 65 mm24 parts2LMIT2.4k
Raspberry PiSPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3k
Raspberry PiCM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0k
Raspberry PiHaxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license672
Raspberry PiPhased
Neumi
75 × 100 mm71 parts2LNo license507