HardLabs

Lab5-Diogo Silva

D10G0S1LVA·Trabalhos-Faculdade·CTeSP/Projeto de Sistemas Eletrónicos (PSE)/Lab_5_PSE/Circuito/Lab5-Diogo_Silva.kicad_pcb

Lab5-Diogo Silva PCB layout, top view — open source AVR/Arduino board by D10G0S1LVA

About the Lab5-Diogo Silva PCB

Lab5-Diogo Silva is an open source AVR/Arduino PCB design by D10G0S1LVA, published on GitHub. It is a board measuring 68.6 × 53.3 mm, with 49 components from 17 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family. Other key parts include the DS1820 and 74HC595. By type, the board carries 23 resistors, 9 connectors, 5 switches, 4 capacitors, 3 ICs and 3 diodes.

From the project

Rep para guardar projetos e trabalhos desenvolvidos na faculdade

Utilizou-se o programa KiCad, uma ferramenta gratuita e Open Source.

No presente Laboratório, criou-se uma Shield para o Arduino Uno, que contém 1x display de 7 Segmentos, Potenciômetro, LED's, Bluetooth, botões e Sensor de Temperatura.

Foi um desafio fazer a PCB deste circuito porque é necessário respeitar as medidas da placa.

Foram criados e desenhados alguns novos simbolos.

Lab5-Diogo Silva, from the project README
From the project README

Main components on the Lab5-Diogo Silva

DS182074HC595

Lab5-Diogo Silva bill of materials (BOM)

49 components, 17 distinct parts.

QtyPartRefs
1
DS1820
U1
2
74HC595
U2, U3
1
Bluetooth + Serial
P0
1
Power
P1
1
Analog
P2
1
Digital
P3
1
Digital
P4
4
CONN_01X01
P5, P6, P7, P8
2
POT
RV1, RV2
2
LCD_7Segmentos
S2, S3
3
SW_Push
SW1, SW2, SW3
1
Green
D1
1
Yellow
D2
1
RED
D3
4
100nF
C1, C2, C3, C4
4
4K7
R1, R5, R6, R23
19
270
R2, R3, R4, R7, R8, R9, R10, R11 +11

Lab5-Diogo Silva design files

The KiCad project lives in the D10G0S1LVA/Trabalhos-Faculdade repository on GitHub; these links point at the commit this page was built from.

Lab5-Diogo Silva: common questions

What microcontroller does the Lab5-Diogo Silva use?

The Lab5-Diogo Silva is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the Lab5-Diogo Silva PCB?

The Lab5-Diogo Silva measures 68.6 × 53.3 mm and is 1.6 mm thick.

How many components are on the Lab5-Diogo Silva?

49 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lab5-Diogo Silva design files?

From the D10G0S1LVA/Trabalhos-Faculdade repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Lab5-Diogo Silva design in my own project?

The repository has no license, so all rights stay with D10G0S1LVA. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Lab5-Diogo Silva without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Trabalhos-Faculdade

Similar boards