BASE
damnitzhemanth-oss·Custom-Scientific-Calc·PCB/Base_PCB/Project_Files/BASE_PCB.kicad_pcb
About the BASE PCB
BASE is an open source STM32 PCB design by damnitzhemanth-oss, published on GitHub. It is a 2-layer board measuring 100.4 × 145.1 mm, with 34 components from 18 distinct parts.
Its main chip is the STM32L431RCT6, from the STM32 family. Other key parts include the — and EVQ-P0P02B. By type, the board carries 18 capacitors, 5 resistors, 4 ICs, 3 connectors, 2 diodes and 1 crystal.
It belongs with the science & space designs in this gallery.
From the project
Making my own scientific calculator!
This repo mainly contains four sections, 1. CAD for OnShape step files. 2. Images for PCB and CAD images. 3. PCB for project files and production files (POS,CSV,BOM,Gerbers). 4. Firmware for code.
production folders contain two CSV's, one is manual made with cost and other is KiCad Generated
Scientific calculators are just normal calculator and all other weird math symbols from trigonometry , algebra etc.

Main components on the BASE
BASE bill of materials (BOM)
34 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L431RCT6 ST(意法半导体) | LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL | U1 |
| 1 | — ~ | CL-2025-02 | U02 |
| 1 | — XCL108B501ER-G | CL-2025-02 | U03 |
| 1 | EVQ-P0P02B null | SW-SMD_EVQ-P0P02B | U4 |
| 1 | C32346 32.768kHz, 12.5pF | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 2 | — Conn_01x13_Pin | PinHeader_1x13_P2.00mm_Vertical | J1, J2 |
| 1 | C65104 Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | — Battery_Cell | BatteryHolder_Keystone_103_1x20mm | BT1 |
| 1 | C72043 LEDGreen | LED_0603_1608Metric | D1 |
| 1 | C2286 LEDRed | LED_0603_1608Metric | D2 |
| 8 | C1525 100nF,50V,X7R | C_0402_1005Metric | C1, C2, C3, C4, C5, C14, C16, C18 |
| 1 | C15849 1uF | C_0402_1005Metric | C6 |
| 2 | C19702 10uF,10V,X5R | C_0402_1005Metric | C7, C15 |
| 5 | C15850 10uF,10V,X5R | C_0805_2012Metric | C10, C11, C12, C17, C21 |
| 2 | C1579 18pF | C_0402_1005Metric | C19, C20 |
| 2 | C11702 1kΩ,1% | R_0402_1005Metric | R1, R2 |
| 2 | C25744 10kΩ,1% | R_0402_1005Metric | R3, R8 |
| 1 | C103090 10Ω | R_0402_1005Metric | R7 |
BASE design files
The KiCad project lives in the damnitzhemanth-oss/Custom-Scientific-Calc repository on GitHub; these links point at the commit this page was built from.
BASE: common questions
What microcontroller does the BASE use?
The BASE is built around the STM32L431RCT6, from the STM32 family.
How big is the BASE PCB?
The BASE measures 100.4 × 145.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BASE?
34 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BASE design files?
From the damnitzhemanth-oss/Custom-Scientific-Calc repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the BASE design in my own project?
The repository has no license, so all rights stay with damnitzhemanth-oss. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BASE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Custom-Scientific-Calc
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k