4 open source boards using the STM32L431RCT6

Real designs built with the STM32L431RCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The STM32L431RCT6 in open source designs

The gallery holds 4 open source boards using the STM32L431RCT6 from 4 GitHub repositories; a typical one measures about 71.5 × 69.5 mm and carries around 30 components.

50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is BASE PCB by damnitzhemanth-oss.

Parts used alongside the STM32L431RCT6

Microcontrollers on boards using the STM32L431RCT6

What boards using the STM32L431RCT6 are built for

STM32L431RCT6: common questions

Where can I find a STM32L431RCT6 reference design?

Each of the 4 boards on this page is a real design using the STM32L431RCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the STM32L431RCT6?

The ADuM1200AR, BLUENRG-M0A and LD1117S33CTR appear in the most repositories here.

Which microcontrollers do boards using the STM32L431RCT6 use?

Most are built on STM32 (4).

How big is a typical board using the STM32L431RCT6?

The median is 71.5 × 69.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the STM32L431RCT6?

By GitHub stars, BASE PCB by damnitzhemanth-oss, with 0 stars.

Can I simulate one of these boards using the STM32L431RCT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part