HardLabs

Hexa space

dancinlab·hexa-space·firmware/board/launch_01/launch_01.kicad_sch

This repository ships a schematic but no board layout.

About the Hexa space PCB

Hexa space is an open source FPGA PCB design by dancinlab, published on GitHub under the MIT license. It is a board, with 1 components from 1 distinct parts.

Its main chip is the XCZU7EV-2FFVC1156I, from the FPGA family.

From the project

🚀 Space 통합 — cosmic + starship + aerospace + astronomy + medicine 11-verb (4 그룹).

Stage-1 program total (5× each + tools) ≈ $26 k (within .roadmap §A.6 ~$25 k envelope).

1. Open /.kicadpro in KiCad 7+ (creates .kicadpro and .kicadsch on first launch if not present). 2. Populate root schematic from /SCHEMATIC.md §2 net list: - Add MCU/FPGA symbol from official Xilinx/ST KiCad library. - Place each U/J/Y/D/F reference per BOM.csv. - Wire nets per §2 table. 3. Assign footprints (CvPcb) — KiCad standard libraries cover all 0402/0805/SMT. 4. Run ERC; resolve any warnings. 5. Export netlist; switch to PCB. 6. Set design rules per /PCB.md §3`. 7. Place + route (Freerouting…

Main components on the Hexa space

XCZU7EV-2FFVC1156I

Hexa space bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XCZU7EV-2FFVC1156I
Zynq US+ XCZU7EV-2FFVC1156I
Xilinx
U1

Hexa space design files

The KiCad project lives in the dancinlab/hexa-space repository on GitHub; these links point at the commit this page was built from.

Hexa space: common questions

What microcontroller does the Hexa space use?

The Hexa space is built around the XCZU7EV-2FFVC1156I, from the FPGA family.

How many components are on the Hexa space?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hexa space design files?

From the dancinlab/hexa-space repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Hexa space design in my own project?

Yes, under the terms of its MIT license, which dancinlab chose for the repository.

Can I test firmware for the Hexa space without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

Similar boards