Flicker old
danfoisy·flicker·board/flicker/flicker_old.kicad_pcb
About the Flicker old PCB
Flicker old is an open source Raspberry Pi PCB design by danfoisy, published on GitHub under the MIT license. It is a 2-layer board, with 493 components from 39 distinct parts.
Its main chip is the RaspberryPiA+, from the Raspberry Pi family. Other key parts include the SI53365, DRV5013, 10CL010YE144C8G, EPCQ16A and MT48LC16M16A2. By type, the board carries 175 capacitors, 29 ICs, 17 resistors, 6 inductors, 3 jumpers and 2 connectors.
From the project
Flicker is a spherical display based on persistence of vision.
Flicker is a spherical display based on persistence of vision.
- docs : Contains a summary of the project - board : Contains the schematics and PCB layout - prints : has all the STL files for the 3D printed parts - FPGA : contains all the FPGA code
More information about the project can be found here.

Main components on the Flicker old
Flicker old bill of materials (BOM)
493 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SI53365 | TSSOP-16_4.4x5mm_P0.65mm | U101, U102, U103 |
| 2 | DRV5013 | TO-92Flat-R | U104, U105 |
| 1 | 10CL010YE144C8G | EQFP-144-1EP_20x20mm_P0.5mm_EP6.7x6.7mm | U201 |
| 1 | EPCQ16A | SOIC-8_3.9x4.9mm_P1.27mm | U202 |
| 1 | MT48LC16M16A2 | TSOP-II-54_22.2x10.16mm_P0.8mm | U301 |
| 1 | TFP401A | TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm | U401 |
| 16 | TLC5955 | HTSSOP-56-1EP_6.1x14mm_P0.5mm_EP3.61x4.7mm | U501, U502, U601, U602, U701, U702, U801, U802 +8 |
| 1 | OKL2-T_12-W12 | OKL2-T-12-W12 | U1301 |
| 1 | EP53A7HQI | EP53A7LQI | U1302 |
| 1 | EP53A7LQI | EP53A7LQI | U1303 |
| 1 | MIC5504-2.5YM5 | SOT-23-5_HandSoldering | U1304 |
| 1 | ASE-10MHZ ASE-10MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X201 |
| 1 | JTAG | PinHeader_2x05_P2.54mm_Vertical_Shrouded | J201 |
| 1 | HDMI_A | HDMI_A_TE_5-1903015-5 | J401 |
| 256 | LTST-C19HE1WT | LTST-C19HE1WT | DP501, DP502, DP503, DP504, DP505, DP506, DP507, DP508 +248 |
| 2 | SOLDERJUMPER_3_BRIDGED12 SolderJumper_3_Bridged12 | SolderJumper-3_bridged12 | JP401, JP402 |
| 1 | SOLDERJUMPER_2_BRIDGED SolderJumper_2_Bridged | SolderJumper-2_bridged | JP1301 |
| 1 | RaspberryPiA+ | RaspberryPi3A+ | SBC1402 |
| 1 | SW_Push | SW_SPST_KMR2 | SW201 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D201 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.5KEXXA 1.5KExxA | D_DO-201AE_P15.24mm_Horizontal | D1301 |
| 6 | 300R | R_0402_1005Metric_HandSolder | FB201, FB202, FB401, FB402, FB403, FB404 |
| 48 | 4.7UF 4.7uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C101, C102, C103, C113, C114, C202, C205, C208 +40 |
| 75 | 0.1UF 0.1uF | C_0402_1005Metric_HandSolder | C104, C105, C106, C107, C108, C109, C110, C111 +67 |
| 2 | 330PF 330pF | C_0402_1005Metric_HandSolder | C117, C118 |
| 1 | 0.1uF | C_0402_1005Metric_HandSolder | C248 |
| 1 | 4.7uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C303 |
| 6 | 22uF, 10V | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C401, C402, C418, C419, C1307, C1308 |
| 32 | 22UF 22uF | CP_Elec_4x5.4 | C501, C505, C506, C510, C601, C605, C606, C610 +24 |
| 1 | 100uF, 25V | CP_Elec_6.3x7.7 | C1301 |
| 2 | 22uF, 25V | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1302, C1303 |
| 1 | 100uF, 10V | CP_Elec_6.3x5.4 | C1304 |
| 6 | 10UF 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1305, C1306, C1309, C1310, C1311, C1312 |
| 8 | 10K | R_0402_1005Metric_HandSolder | R101, R102, R202, R203, R205, R206, R208, R401 |
| 2 | 330R | R_0402_1005Metric_HandSolder | R201, R209 |
| 3 | 1.0K | R_0402_1005Metric_HandSolder | R204, R207, R211 |
| 1 | 24R9 | R_0402_1005Metric_HandSolder | R210 |
| 1 | 1.6K | R_0402_1005Metric_HandSolder | R1301 |
| 2 | 100R | R_0402_1005Metric_HandSolder | R1302, R1303 |
Flicker old design files
The KiCad project lives in the danfoisy/flicker repository on GitHub; these links point at the commit this page was built from.
Flicker old: common questions
What microcontroller does the Flicker old use?
The Flicker old is built around the RaspberryPiA+, from the Raspberry Pi family.
How big is the Flicker old PCB?
The Flicker old has 2 copper layers and is 1.6 mm thick.
How many components are on the Flicker old?
493 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flicker old design files?
From the danfoisy/flicker repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Flicker old design in my own project?
Yes, under the terms of its MIT license, which danfoisy chose for the repository.
Can I test firmware for the Flicker old without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in flicker
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507