MistMaker-Seeed-Expansion-V0.1
Dav1dyang·Programmable-Mist-Maker·variants/xiao-extension-kit/hardware/kicad/MistMaker-Seeed-Expansion-V0.1.kicad_pcb
About the MistMaker-Seeed-Expansion-V0.1 PCB
MistMaker-Seeed-Expansion-V0.1 is an open source PCB design by Dav1dyang, published on GitHub under the MIT license. It is a 2-layer board measuring 17.8 × 21 mm, with 17 components from 17 distinct parts.
Other key parts include the AP7361C-3.3V and INA180A3. By type, the board carries 7 resistors, 3 capacitors, 2 ICs, 1 transistor, 1 connector and 1 LED.
From the project
An open-source, low-cost ultrasonic mist maker designed to share commercial humidifier circuits and empower creators with accessible, well-documented hardware.
1. Upload XiaoMistMakerV0-1.zip (defaults are fine; 1.6 mm, any color). 2. Enable SMT assembly, upload bom.csv + positions.csv`. 3. Hand-solder afterwards: PH-2.0 piezo connector, XIAO headers.
- INA180 — current-sense amp (A3 = 100 V/V) - UCC27511A — single-channel gate driver - DMT10H009LCG — MOSFET - Seeed XIAO ESP32-C6
Main components on the MistMaker-Seeed-Expansion-V0.1
MistMaker-Seeed-Expansion-V0.1 bill of materials (BOM)
17 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7361C-3.3V INA180A3 | SOT-23-5 | U2 |
| 1 | INA180A3 UCC27511ADBV | SOT-23-6 | U3 |
| 1 | DMT10H009LCG-7 | DMP3007SCG7 | Q3 |
| 1 | PH-2PWB | PH2PWB | J3 |
| 1 | C25503345 LED_R | LED_0402_1005Metric | LED2 |
| 1 | PMEG10010ELRX-TP | D_SOD-123FL | D1 |
| 1 | C49338546 3 Legged Inductor | IND-SMD_3P-CD75 | L1 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric | C1 |
| 1 | 1uF | C_0402_1005Metric | C2 |
| 1 | 10UF 100nF | C_0603 | C5 |
| 1 | 30mΩ | R_1206_3216Metric | R1 |
| 1 | 10Ω | R_0603 | R2 |
| 1 | 2.2Ω | R_0603 | R3 |
| 1 | 100KΩ | R_0603_1608Metric | R4 |
| 1 | 1kΩ | R_0402_1005Metric | R5 |
| 1 | 510Ω | R_0402 | R7 |
| 1 | 22Ω | R_0402 | R20 |
MistMaker-Seeed-Expansion-V0.1 design files
The KiCad project lives in the Dav1dyang/Programmable-Mist-Maker repository on GitHub; these links point at the commit this page was built from.
MistMaker-Seeed-Expansion-V0.1: common questions
How big is the MistMaker-Seeed-Expansion-V0.1 PCB?
The MistMaker-Seeed-Expansion-V0.1 measures 17.8 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MistMaker-Seeed-Expansion-V0.1?
17 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MistMaker-Seeed-Expansion-V0.1 design files?
From the Dav1dyang/Programmable-Mist-Maker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MistMaker-Seeed-Expansion-V0.1 design in my own project?
Yes, under the terms of its MIT license, which Dav1dyang chose for the repository.