MistMaker-Seeed-Extension-V0.1

Dav1dyang·Programmable-Mist-Maker·variants/xiao-extension-kit/hardware/kicad/MistMaker-Seeed-Extension-V0.1.kicad_pcb

MistMaker-Seeed-Extension-V0.1 PCB layout, top view — open source board by Dav1dyang

About the MistMaker-Seeed-Extension-V0.1 PCB

MistMaker-Seeed-Extension-V0.1 is an open source PCB design by Dav1dyang, published on GitHub under the MIT license. It is a 2-layer board measuring 17.8 × 21 mm, with 17 components from 17 distinct parts.

Other key parts include the AP7361C-3.3V and INA180A3. By type, the board carries 7 resistors, 3 capacitors, 2 ICs, 1 transistor, 1 connector and 1 LED.

From the project

An open-source, low-cost ultrasonic mist maker designed to share commercial humidifier circuits and empower creators with accessible, well-documented hardware.

1. Upload XiaoMistMakerV0-1.zip (defaults are fine; 1.6 mm, any color). 2. Enable SMT assembly, upload bom.csv + positions.csv`. 3. Hand-solder afterwards: PH-2.0 piezo connector, XIAO headers.

- INA180 — current-sense amp (A3 = 100 V/V) - UCC27511A — single-channel gate driver - DMT10H009LCG — MOSFET - Seeed XIAO ESP32-C6

Main components on the MistMaker-Seeed-Extension-V0.1

MistMaker-Seeed-Extension-V0.1 bill of materials (BOM)

17 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP7361C-3.3V
INA180A3
U2
1
INA180A3
UCC27511ADBV
U3
1
DMT10H009LCG-7
Q3
1
PH-2PWB
J3
1
C25503345
LED_R
LED2
1
PMEG10010ELRX-TP
D1
1
C49338546
3 Legged Inductor
L1
1
0.1UF
0.1uF
C1
1
1uF
C2
1
10UF
10uF
C5
1
30mΩ
R1
1
10Ω
R2
1
2.2Ω
R3
1
100KΩ
R4
1
1kΩ
R5
1
510Ω
R7
1
22Ω
R20

MistMaker-Seeed-Extension-V0.1 design files

The KiCad project lives in the Dav1dyang/Programmable-Mist-Maker repository on GitHub; these links point at the commit this page was built from.

MistMaker-Seeed-Extension-V0.1: common questions

How big is the MistMaker-Seeed-Extension-V0.1 PCB?

The MistMaker-Seeed-Extension-V0.1 measures 17.8 × 21 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MistMaker-Seeed-Extension-V0.1?

17 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MistMaker-Seeed-Extension-V0.1 design files?

From the Dav1dyang/Programmable-Mist-Maker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MistMaker-Seeed-Extension-V0.1 design in my own project?

Yes, under the terms of its MIT license, which Dav1dyang chose for the repository.

More boards in Programmable-Mist-Maker