Breakout boards
About the Breakout boards
Breakout boards is an open source PCB design by Davang, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 155 × 77 mm, with 122 components from 15 distinct parts.
By type, the board carries 48 diodes, 41 switches, 20 resistors, 10 connectors and 3 capacitors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Kicad project with custom breakout boards
Breakout boards bill of materials (BOM)
122 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J1, J10 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 7 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3, J4, J5, J6, J7, J8, J9 |
| 32 | SW_Push_45deg | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +24 |
| 8 | SW_Push | SW_Hotswap_Kailh_MX_1.00u | SW33, SW34, SW35, SW36, SW37, SW38, SW39, SW40 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW41 |
| 7 | D_Small | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D7, D8 |
| 16 | LED_45deg | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D6, D9, D10, D12, D13, D14, D15, D16 +8 |
| 1 | LED_ARGB | LED_HSMF-C118 | D11 |
| 16 | D_Small | D_DO-35_SOD27_P7.62mm_Horizontal | D25, D26, D27, D28, D29, D30, D31, D32 +8 |
| 8 | LED_Small | LED_D5.0mm_Clear | D41, D42, D43, D44, D45, D46, D47, D48 |
| 3 | 10n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3 |
| 9 | R_Small | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 8 | R_Small | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11, R12, R13, R14, R15, R16, R17 |
| 3 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R18, R19, R20 |
Breakout boards design files
The KiCad project lives in the Davang/breakout_boards repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/breakout_boards.kicad_pcb
- Schematicpcb/breakout_boards.kicad_sch
Breakout boards: common questions
How big is the Breakout boards?
The Breakout boards measures 155 × 77 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakout boards?
122 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breakout boards design files?
From the Davang/breakout_boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Breakout boards design in my own project?
Yes, under the terms of its GPL-3.0 license, which Davang chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979