HardLabs

Acorn Electron 128K banked Flash ROM Cartridge

dboddie·Acorn_Electron_128K_banked_Flash_ROM_Cartridge

Acorn Electron 128K banked Flash ROM Cartridge PCB layout, top view — open source board by dboddie

About the Acorn Electron 128K banked Flash ROM Cartridge PCB

Acorn Electron 128K banked Flash ROM Cartridge is an open source PCB design by dboddie, published on GitHub. It is a 2-layer board measuring 84.9 × 62.5 mm, with 5 components from 5 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

KiCad files for a 128K banked flash ROM cartridge for the Acorn Electron.

This repository provides schematic and circuit layout files for use with KiCad describing a 128K Flash ROM cartridge suitable for use with the Acorn Electron microcomputer's Plus 1 expansion unit. It is based on Paul Boddie's original prototyping breakout cartridge.

AcornElectronCartridge.kicad_pcb The circuit board layout

AcornElectronCartridge.net The netlist, generated from the schematic and distributed here for convenience

Acorn Electron 128K banked Flash ROM Cartridge bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
Acorn_Electron_cartridge_edge_connector_rear_side_A
CONN1
1
Acorn_Electron_cartridge_edge_connector_front_side_B
CONN2
1
74LS174
FLIP1
1
SST39SF010
Flash1
1
74HC00
NAND1

Acorn Electron 128K banked Flash ROM Cartridge design files

The KiCad project lives in the dboddie/Acorn_Electron_128K_banked_Flash_ROM_Cartridge repository on GitHub; these links point at the commit this page was built from.

Acorn Electron 128K banked Flash ROM Cartridge: common questions

How big is the Acorn Electron 128K banked Flash ROM Cartridge PCB?

The Acorn Electron 128K banked Flash ROM Cartridge measures 84.9 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Acorn Electron 128K banked Flash ROM Cartridge?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Acorn Electron 128K banked Flash ROM Cartridge design files?

From the dboddie/Acorn_Electron_128K_banked_Flash_ROM_Cartridge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Acorn Electron 128K banked Flash ROM Cartridge design in my own project?

The repository has no license, so all rights stay with dboddie. Use it as a reference, and ask the author before reusing the design.

Similar boards