HardLabs

Pcb

dcpedit·tklish·pcb-080/pcb.kicad_pcb

Pcb layout, top view — open source STM32 board by dcpedit
Simulate this board

About the Pcb

Pcb is an open source STM32 PCB design by dcpedit, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 347.7 × 119.1 mm, with 218 components from 17 distinct parts.

Its main chip is the STM32F072C8TX, from the STM32 family. Other key parts include the XC6206PXXXMR-REGULATOR_LINEAR. By type, the board carries 96 diodes, 9 capacitors, 3 resistors, 2 ICs, 2 switches and 2 LEDs.

It belongs with the keyboards designs in this gallery.

From the project

TKL inspired PCBs

TKLish is a series of PCBS that mimic the style of a traditional TLK (Ten Key Less) keyboard. Below are the 3 variants:

s40 - 40% layout with staggered keys. KLE layouts o40 - 40% layout with ortholinear keys. KLE layouts * o80 - 80% layout with ortholinear keys. KLE layouts

s40 can use standard keycaps (no 40s kit required) s40 & o80 can utilize any ergo/ergodox kit with 1.5u modifier keys (ex. GMK Sixes, SA Carbon) PCB can support up to 3 rotary encoders Utilizes Unified Daughterboard (C4 version with Molex Pico-EZmate connectors)

Pcb, from the project README
From the project README

Main components on the Pcb

STM32F072C8TXXC6206PXXXMR-REGULATOR_LINEAR

Pcb bill of materials (BOM)

218 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F072C8TX
STM32F072C8Tx
U1
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U2
1
C588524
JST
J1
85
MX-NoLED
MX10, MX16, MX17, MX18, MX19, MX20, MX21, MX22 +77
9
MX-NoLED
MX11, MX12, MX14, MX15, MX89, MX90, MX91, MX92 +1
4
MX-NoLED
MX48.15, MX50.15, MX54.15, MX56.15
2
MX-NoLED
MX51.2, MX57.2
2
C318884
RST
SW1, SW2
3
RotaryEncoder_Switch
SWR1, SWR2, SWR3
1
MX-LED
MX13
1
MX-LED
MX94
96
C81598
~
D10, D11, D12, D13, D14, D15, D16, D17 +88
6
100NF
100nF
C1, C3, C4, C5, C6, C7
1
4.7UF
4.7uF
C2
2
1UF
1uF
C8, C9
1
10K
10k
R1
2
470
R2, R3

Pcb design files

The KiCad project lives in the dcpedit/tklish repository on GitHub; these links point at the commit this page was built from.

Pcb: common questions

What microcontroller does the Pcb use?

The Pcb is built around the STM32F072C8TX, from the STM32 family.

How big is the Pcb?

The Pcb measures 347.7 × 119.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb?

218 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pcb design files?

From the dcpedit/tklish repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pcb design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which dcpedit chose for the repository.

Can I test firmware for the Pcb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in tklish

Similar boards