Ventaxia esphome
deb0ro·ventaxia-esphome·hardware/mvhr_ctrl/mvhr_ctrl.kicad_pcb
About the Ventaxia esphome PCB
Ventaxia esphome is an open source PCB design by deb0ro, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 95 × 95 mm, with 57 components from 25 distinct parts.
Other key parts include the TSR 1-4850WI. By type, the board carries 30 resistors, 9 connectors, 9 capacitors, 4 transistors, 3 diodes and 1 IC.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
ESP32-S3 / ESPHome replacement control board for Vent-Axia Sentinel Kinetic MVHR (439150), controlled from Home Assistant
A drop-in replacement for the Vent-Axia 439150 control board of the older two-board Sentinel Kinetic heat recovery units (control board 439150 + power board 439155). The new board plugs into J10 of the power board 439155 with the original 34-way ribbon cable and is controlled from Home Assistant through ESPHome.
The control logic runs on the ESP. Home Assistant only changes the mode and the settings and shows the state. Without Home Assistant or Wi-Fi the unit keeps running with the last settings stored in flash.

Main components on the Ventaxia esphome
Ventaxia esphome bill of materials (BOM)
57 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TRACO TSR 1-4850WI, straight pins (9-72 V in, 5 V 1 A); case pins 4/5 = mechanical, no net TSR 1-4850WI | TRACO_TSR-1WI_SIP3_CasePins | U1 |
| 4 | onsemi PN2222A (TO-92, pins E-B-C = 1-2-3, flat side as on the silkscreen) PN2222A | TO-92_Inline_Wide | Q1, Q2, Q3, Q4 |
| 1 | Box header 2x17 2.54mm IDC 2x17 -> 439155 J10 | IDC-Header_2x17_P2.54mm_Vertical | J1 |
| 1 | Female header 1x22 2.54 mm DevKit J1 (left) | PinSocket_1x22_P2.54mm_Vertical | J2 |
| 1 | Female header 1x22 2.54 mm DevKit J3 (right) | PinSocket_1x22_P2.54mm_Vertical | J3 |
| 1 | JST B3B-XH-A OUTDOOR | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | JST B3B-XH-A SUPPLY | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | JST B3B-XH-A EXTRACT | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | JST B3B-XH-A EXHAUST | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | JST B4B-XH-A Humidity SHT4x (0x44) | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | JST B4B-XH-A CO2 SCD41 (0x62) | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | Littelfuse RXEF030 (72 V, hold 0.30 A / trip 0.60 A @ 20 C), alt. Bel Fuse 0ZRE0033FF1A RXEF030 | Fuse_BelFuse_0ZRE0033FF_L11.4mm_W3.8mm | F1 |
| 1 | P6KE47CA (40.2 V standoff, 64.8 V clamp) P6KE47CA | D_DO-15_P10.16mm_Horizontal | D1 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | red 3 mm | LED_D3.0mm | D3 |
| 1 | Electrolytic 10 uF 100 V, D8 P3.5 10u/100V | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 47U/16V 47u/16V | CP_Radial_D6.3mm_P2.50mm | C2 |
| 4 | 100N 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C13, C14, C15 |
| 1 | 100U/10V 100u/10V | CP_Radial_D6.3mm_P2.50mm | C5 |
| 2 | 1n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C21, C41 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R61, R62, R63, R64 |
| 6 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R11, R19, R24, R44 |
| 8 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12, R13, R15, R16, R23, R25, R43, R45 |
| 3 | 22K 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14, R21, R41 |
| 7 | 4K7 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R18, R20, R22, R40, R42, R60 |
Ventaxia esphome design files
The KiCad project lives in the deb0ro/ventaxia-esphome repository on GitHub; these links point at the commit this page was built from.
Ventaxia esphome: common questions
How big is the Ventaxia esphome PCB?
The Ventaxia esphome measures 95 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ventaxia esphome?
57 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ventaxia esphome design files?
From the deb0ro/ventaxia-esphome repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ventaxia esphome design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k