S88Driver
About the S88Driver PCB
S88Driver is an open source PCB design by deltaphi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 28 × 40 mm, with 5 components from 4 distinct parts.
Other key parts include the 4044. By type, the board carries 3 connectors, 1 IC and 1 capacitor.
From the project
Sketch for a Switchboard talking the CAN CS2 protocol based on the ESP32 NodeMCU-Board
This project is built using PlatformIO. It makes use of some features that may not be easily portable to other Arduino-supported MCUs.
This project makes use of several libraries. Versioned links to those libraries are available as git submodules. Note that for seom libraries, using forks from the same source as this project may be required.
Note that the CAN driver from the lib directory must not be present when you want to compile using the ESP32-IDF driver. Otherwise, the Controller will just attempt to sit there without sending queued messages or receiving any messages transmitted on…
Main components on the S88Driver
S88Driver bill of materials (BOM)
5 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4044 74LS367 | DIP-16_W7.62mm_LongPads | U1 |
| 2 | Conn_01x06_Male | PinSocket_1x06_P2.54mm_Vertical | J1, J3 |
| 1 | S88_IN Conn_01x06_Female | PinSocket_1x06_P2.54mm_Horizontal | J2 |
| 1 | 10N 100n | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
S88Driver design files
The KiCad project lives in the deltaphi/RR32CanController repository on GitHub; these links point at the commit this page was built from.
S88Driver: common questions
How big is the S88Driver PCB?
The S88Driver measures 28 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the S88Driver?
5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the S88Driver design files?
From the deltaphi/RR32CanController repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the S88Driver design in my own project?
Yes, under the terms of its GPL-3.0 license, which deltaphi chose for the repository.
More boards in RR32CanController
ESP32ControllerTHT
260.4 × 132.1 mm64 parts2LGPL-3.02
ESP32Controller
35 × 124 mm54 parts2LGPL-3.02
IOBreakout
85.1 × 49.5 mm45 parts2LGPL-3.02
SwitchboardSMD
66 × 33 mm42 parts2LGPL-3.02
Switchboard
99.1 × 48.3 mm38 parts2LGPL-3.02
ESP32ESP32Breakout
81.3 × 59.7 mm27 parts2LGPL-3.02
LocoCardBreakout
75 × 50 mm6 parts2LGPL-3.02