HardLabs

Switchboard

deltaphi·RR32CanController·Hardware/Switchboard/Switchboard.kicad_pcb

Switchboard PCB layout, top view — open source board by deltaphi
Simulate this board

About the Switchboard PCB

Switchboard is an open source PCB design by deltaphi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 99.1 × 48.3 mm, with 38 components from 13 distinct parts.

Other key parts include the 4044 and 4014. By type, the board carries 13 resistors, 9 capacitors, 8 switches, 4 connectors, 3 ICs and 1 transistor.

From the project

Sketch for a Switchboard talking the CAN CS2 protocol based on the ESP32 NodeMCU-Board

This project is built using PlatformIO. It makes use of some features that may not be easily portable to other Arduino-supported MCUs.

This project makes use of several libraries. Versioned links to those libraries are available as git submodules. Note that for seom libraries, using forks from the same source as this project may be required.

Note that the CAN driver from the lib directory must not be present when you want to compile using the ESP32-IDF driver. Otherwise, the Controller will just attempt to sit there without sending queued messages or receiving any messages transmitted on…

Main components on the Switchboard

40444014

Switchboard bill of materials (BOM)

38 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
4044
U1, U2
1
4014
U3
1
MMBT5551L
BC237
Q1
1
S88_In_Header
J1
1
S88_IN
S88_In_Plug
J2
1
S88_Out_Header
J3
1
S88_OUT
S88_Out_Plug
J4
8
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
8
10N
10n
C1, C2, C3, C4, C5, C6, C7, C8
1
100N
100n
C9
10
10K
10k
R1, R2, R4, R5, R6, R7, R8, R9 +2
1
100K
100k
R3
2
100k
RN1, RN2

Switchboard design files

The KiCad project lives in the deltaphi/RR32CanController repository on GitHub; these links point at the commit this page was built from.

Switchboard: common questions

How big is the Switchboard PCB?

The Switchboard measures 99.1 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Switchboard?

38 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Switchboard design files?

From the deltaphi/RR32CanController repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Switchboard design in my own project?

Yes, under the terms of its GPL-3.0 license, which deltaphi chose for the repository.

More boards in RR32CanController