BFUSB-16
depressobbq·BFUSB-16
About the BFUSB-16 PCB
BFUSB-16 is an open source PCB design by depressobbq, published on GitHub. It is a 2-layer board measuring 154.7 × 96 mm, with 70 components from 11 distinct parts.
Other key parts include the SL2.1A. By type, the board carries 31 capacitors, 18 connectors, 6 fuses, 5 ICs, 5 crystals and 3 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
its a Big effin USB hub, based on "off- the-shelf" parts.
The goal here is to have something with easy to source parts, that asre simultaniously as easy to solder by hand as possible. I went with good ol barrel caps, and single stacked usbs. Also I went with crystals at each of the hub chips, despite them being able to run without one, just due to no trusting it to actually do so. the hope here being that with nice big beefy caps and crystals on each hub chip, this thing ought to be stable even fully populated. If it works as intended, it should be great for people like me who need a million USB's hooked to their PC for sim racing, but it would also…

Main components on the BFUSB-16
BFUSB-16 bill of materials (BOM)
70 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | SL2.1A | SO16 | U1, U2, U3, U4, U5 |
| 5 | Crystal | Crystal_HC49-U_Vertical | Y1, Y2, Y3, Y4, Y5 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J2 |
| 16 | USB_A | USB_A_Stewart_SS-52100-001_Horizontal_Bedge | J3, J4, J5, J6, J7, J8, J9, J10 +8 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 5 | Fuse_Small | Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F2, F3, F4, F5, F6 |
| 1 | D | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | LED | LED_D3.0mm | D2, D3 |
| 31 | C | C_Radial_D10.0mm_H12.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +23 |
| 2 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2 |
BFUSB-16 design files
The KiCad project lives in the depressobbq/BFUSB-16 repository on GitHub; these links point at the commit this page was built from.
- LayoutBFUSB_HUB.kicad_pcb
- SchematicBFUSB_HUB.kicad_sch
BFUSB-16: common questions
How big is the BFUSB-16 PCB?
The BFUSB-16 measures 154.7 × 96 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BFUSB-16?
70 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the BFUSB-16 design files?
From the depressobbq/BFUSB-16 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BFUSB-16 design in my own project?
The repository has no license, so all rights stay with depressobbq. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389