HMD-Fusion-DIY-Cases
DevonHope·HMD-Fusion-DIY-Cases·Development/Breakout-Flex-PCB-Testing-Stand/Breakout-Flex-PCB-Testing-Stand.kicad_pcb
About the HMD-Fusion-DIY-Cases PCB
HMD-Fusion-DIY-Cases is an open source PCB design by DevonHope, published on GitHub under the MIT license. It is a 2-layer board measuring 145 × 27 mm, with 7 components from 2 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A repo for storing my progress in developing a case/outift for the HMD Fusion phone
The breakout board is used to breakout the 6 pin header on the back of the phone and expand it into the ISO standard 2.54mm/0.1" 6 pin header for breadboard testing and development of external circuits. This board should be manufactured using a flexible PCB material, the case and basic funcationality of the spring pins were designed with this in mind.
There is a testbench case to go with this, it is best printed in TPU or other flexible materials to ensure the spring loaded pins on the breakout board do not get bent or damaged when removing the phone from the case. To insert the PCB into the…
HMD-Fusion-DIY-Cases bill of materials (BOM)
7 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 2306334-3 | TE_2306334-3 | J1, J2, J3, J4, J5, J6 |
| 1 | CONN_01X06_PIN Conn_01x06_Pin | PinSocket_1x06_P2.54mm_Vertical | J7 |
HMD-Fusion-DIY-Cases design files
The KiCad project lives in the DevonHope/HMD-Fusion-DIY-Cases repository on GitHub; these links point at the commit this page was built from.
HMD-Fusion-DIY-Cases: common questions
How big is the HMD-Fusion-DIY-Cases PCB?
The HMD-Fusion-DIY-Cases measures 145 × 27 mm, has 2 copper layers and is 0.2 mm thick.
How many components are on the HMD-Fusion-DIY-Cases?
7 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HMD-Fusion-DIY-Cases design files?
From the DevonHope/HMD-Fusion-DIY-Cases repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HMD-Fusion-DIY-Cases design in my own project?
Yes, under the terms of its MIT license, which DevonHope chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979