ARC-210 Rotary Switch
dgdimick·ARC-210-DCS-Display·PCBs/Rotary Switches/Rotary Switches.kicad_pcb
About the ARC-210 Rotary Switch PCB
ARC-210 Rotary Switch is an open source PCB design by dgdimick, published on GitHub. It is a 2-layer board measuring 37.1 × 33.7 mm, with 8 components from 4 distinct parts.
By type, the board carries 6 resistors, 1 connector and 1 switch.
It belongs with the displays & leds and rf & radio designs in this gallery.
From the project
DIY ARC-210 radio panel for DCS A-10C II using DCSBIOS (DCS-BIOS), Teensy 4.1 and an ILI9488 TFT, with firmware, PCB designs and printable parts.
This corrected KiCad 10 project replaces the withdrawn initial version. Switch terminal 1 is used for position 1. The resistor ladder uses six resistors (R1–R6) to provide seven switch-position voltages. The switch contacts used are 1, 2, 4, 5, 7, 8 and 10; terminal 11 is unused. A1 is the common contact and analog output.
Open Rotary Switches.kicadpro`. The project includes its custom symbol and A12505RNCQ footprint, with relative library paths so they work after downloading.
ARC-210 Rotary Switch bill of materials (BOM)
8 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | A12505RNCQ | A12505RNCQ | SW1 |
| 5 | 1k 1% 1/8W | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4, R5 |
| 1 | 1k 1%1/8W | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R6 |
ARC-210 Rotary Switch design files
The KiCad project lives in the dgdimick/ARC-210-DCS-Display repository on GitHub; these links point at the commit this page was built from.
ARC-210 Rotary Switch: common questions
How big is the ARC-210 Rotary Switch PCB?
The ARC-210 Rotary Switch measures 37.1 × 33.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ARC-210 Rotary Switch?
8 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ARC-210 Rotary Switch design files?
From the dgdimick/ARC-210-DCS-Display repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ARC-210 Rotary Switch design in my own project?
The repository has no license, so all rights stay with dgdimick. Use it as a reference, and ask the author before reusing the design.
More boards in ARC-210-DCS-Display
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k