Dhruv s board-

Dhruv2212-star·Dhruv-s-board-·PCB/Dhruv's board.kicad_pcb

Dhruv s board- layout, top view — open source STM32 board by Dhruv2212-star

About the Dhruv s board-

Dhruv s board- is an open source STM32 PCB design by Dhruv2212-star, published on GitHub. It is a 2-layer board measuring 58 × 58 mm, with 30 components from 21 distinct parts.

Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the AP2112K-3.3. By type, the board carries 10 capacitors, 6 resistors, 5 connectors, 3 diodes, 2 ICs and 2 switches.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

a simple STM32 based devboard

The Devboard is divided into the following blocks: 1. Block 1 — USB Power Input & Protection 2. Block 2 — 3.3 V Power Supply 3. Block 3 — STM32 Minimum System 4. Block 4 — SWD Programming Interface 5. Block 5 — User Interface 6. Block 6 — GPIO Expansion ## lets understand why each component was placed and what is it's function block wise Block 1 — USB Power Input & Protection: Provide safe 5 V input from a USB-C connector and protect the board against faults before supplying the voltage regulator

Main components on the Dhruv s board-

Dhruv s board- bill of materials (BOM)

30 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U1
1
STM32F103C8TX
STM32F103C8Tx
U2
1
8 MHz
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J2
1
CONN_01X04
Conn_01x04
J3
2
CONN_01X20
Conn_01x20
J4, J5
1
Bourns MF-R110
F1
2
SW_Push
SW1, SW2
1
ESD9B5.0ST5G
D1
1
Power
D2
1
LED
D3
1
10 µF, X7R, 16 V
C1
2
100 nF, X7R
C2, C4
1
10 µF, X7R, 10 V
C3
4
100 nF
C5, C6, C7, C8
2
22PF
22 pF
C9, C10
1
1 kΩ, 1%
R1
2
5.1 kΩ
R2, R3
2
10K
10 kΩ
R4, R5
Show 1 more
QtyPartRefs
1
330R
330 Ω
R6

Dhruv s board- design files

The KiCad project lives in the Dhruv2212-star/Dhruv-s-board- repository on GitHub; these links point at the commit this page was built from.

Dhruv s board-: common questions

What microcontroller does the Dhruv s board- use?

The Dhruv s board- is built around the STM32F103C8TX, from the STM32 family.

How big is the Dhruv s board-?

The Dhruv s board- measures 58 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dhruv s board-?

30 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dhruv s board- design files?

From the Dhruv2212-star/Dhruv-s-board- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dhruv s board- design in my own project?

The repository has no license, so all rights stay with Dhruv2212-star. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dhruv s board- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards