PICoder
Didgitalpunk·PICoder·PIC_encoders_to_serial/PIC_encoders_to_serial.kicad_pcb
About the PICoder PCB
PICoder is an open source PIC PCB design by Didgitalpunk, published on GitHub. It is a 2-layer board measuring 35 × 35 mm, with 16 components from 14 distinct parts.
Its main chip is the DSPIC33FJ64MC802-xSP, from the PIC family. Other key parts include the LM78L33_TO92. By type, the board carries 6 capacitors, 5 connectors, 2 ICs, 2 resistors and 1 jumper.
From the project
repository for an encoder circuit meant to replace the HCTL2020 and its brothers with a PIC33 uC outputing the data over serial
Main components on the PICoder
PICoder bill of materials (BOM)
16 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DSPIC33FJ64MC802-xSP | DIP-28_W7.62mm | U1 |
| 1 | LM78L33_TO92 | TO-92_Inline | U2 |
| 1 | Programming | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical_NO-KEEPOUT_SMALL-PADS | J1 |
| 1 | Conn_01x02 | Molex_SPOX_5268-02A_1x02_P2.50mm_Horizontal | J2 |
| 1 | Conn_01x04 | Molex_SPOX_5268-04A_1x04_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x05 | Molex_SPOX_5268-05A_1x05_P2.50mm_Horizontal | J4 |
| 1 | Programming | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | 10uf | CP_EIA-1608-08_AVX-J | C1 |
| 2 | 0.1uF | C_0402_1005Metric | C2, C4 |
| 1 | .1uF | C_0402_1005Metric | C3 |
| 2 | 1uF | C_0402_1005Metric | C5, C6 |
| 1 | 10k | R_0402_1005Metric | R1 |
| 1 | 470R | R_0402_1005Metric | R2 |
PICoder design files
The KiCad project lives in the Didgitalpunk/PICoder repository on GitHub; these links point at the commit this page was built from.
PICoder: common questions
What microcontroller does the PICoder use?
The PICoder is built around the DSPIC33FJ64MC802-xSP, from the PIC family.
How big is the PICoder PCB?
The PICoder measures 35 × 35 mm, has 2 copper layers and is 2 mm thick.
How many components are on the PICoder?
16 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the PICoder design files?
From the Didgitalpunk/PICoder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PICoder design in my own project?
The repository has no license, so all rights stay with Didgitalpunk. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PICoder without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379