Metal Detector

Didsbury-Diddlers-Co-Est-2006·ENEL300_RC_CAR·PCBs/Metal Detector/Metal Detector.kicad_pcb

Metal Detector PCB layout, top view — open source board by Didsbury-Diddlers-Co-Est-2006

About the Metal Detector PCB

Metal Detector is an open source PCB design by Didsbury-Diddlers-Co-Est-2006, published on GitHub. It is a 2-layer board measuring 97 × 46.5 mm, with 14 components from 13 distinct parts.

Other key parts include the AVR128DB28-I/SP and PFETSTS5P3LLH6. By type, the board carries 6 connectors, 3 capacitors, 2 ICs, 2 resistors and 1 buzzer.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Car

Vikram Procter, Caleb Garcia, Graham Coleman, Devon Calvin | Feb 12, 2025

Remote control car for our ENEL 300 design class at the Schulich School of Engineering at University of Calgary.

Our car integrates a variety of features including distance measurement, metal detection, togglable head/tail lights, tank steering, and more. These features are implemented through 3 custom PCBs, designed in Altium or KiCad. Wireless locomotion control and light control is implemented using the HC-05 Bluetooth transceiver module. The physical design was inspired by a RAM 3500 Cummins 6.7 Twin Turbo and its…

Metal Detector, from the project README
From the project README

Main components on the Metal Detector

AVR128DB28-I/SPPFETSTS5P3LLH6

Metal Detector bill of materials (BOM)

14 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AVR128DB28-I/SP
NE555D
U1
1
PFETSTS5P3LLH6
AVR128DB28x-xSP
U2
1
MOLEX2125201006
Conn_01x02_Pin
J1
1
8POS215307-4
1724470206
J2
1
SCREWTWO1984617
Conn_01x01_Pin
J3
1
MOLEX2125201006
Conn_01x04_Pin
J4
1
POS3HEADER1945106
Conn_01x01_Pin
J5
1
SCREWTWO1984617
Conn_01x03_Pin
J9
1
Buzzer
BZ1
2
1UF
2.2uF
C1, C2
1
0.1UF
10uF
C3
1
47K
R1
1
330
500
R2

Metal Detector design files

The KiCad project lives in the Didsbury-Diddlers-Co-Est-2006/ENEL300_RC_CAR repository on GitHub; these links point at the commit this page was built from.

Metal Detector: common questions

How big is the Metal Detector PCB?

The Metal Detector measures 97 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Metal Detector?

14 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Metal Detector design files?

From the Didsbury-Diddlers-Co-Est-2006/ENEL300_RC_CAR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Metal Detector design in my own project?

The repository has no license, so all rights stay with Didsbury-Diddlers-Co-Est-2006. Use it as a reference, and ask the author before reusing the design.

More boards in ENEL300_RC_CAR

Similar boards