LOS-DECEPTICONS-minisumo

diegobastianelli·LOS-DECEPTICONS-minisumo·hardware/pcb/PCB_Sumo.kicad_pcb

LOS-DECEPTICONS-minisumo PCB layout, top view — open source board by diegobastianelli

About the LOS-DECEPTICONS-minisumo PCB

LOS-DECEPTICONS-minisumo is an open source PCB design by diegobastianelli, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 60 × 80 mm, with 27 components from 8 distinct parts.

By type, the board carries 10 resistors and 1 capacitor.

It belongs with the robotics & motion designs in this gallery.

From the project

Robot mini-sumo con PCB propia (KiCad) y ESP32-S3 — Tecnología Eléctrica, USC

- Diego Bastianelli Lorenzo - Rubén Célix Rodríguez - Samuel Agrasar Magariños

El robot cumple la normativa estándar de mini-sumo: base de máximo 10 × 10 cm, masa máxima de 500 g y retardo obligatorio de 5 s antes de moverse. La electrónica se integra en una PCB propia de dos capas que actúa como placa base (shield): los módulos comerciales (microcontrolador, driver de motores y regulador) se insertan en zócalos, y los sensores se conectan por cable.

LOS-DECEPTICONS-minisumo bill of materials (BOM)

27 components, 8 distinct parts.

QtyPartRefs
3
Conn_01x02
BATERIA_XT30, MOTOR_DER1, MOTOR_IZQ1
8
Conn_01x03
DC_DC1, QRE_DER1, QRE_IZQ1, SHARP_1, SHARP_2, SHARP_3, SHARP_4, SHARP_5
1
SW_DIP_x04
DIP_SW1
2
Conn_01x09
ESP32_DER1, ESP32_IZQ1
2
Conn_01x08
TB6612_DER1, TB6612_IZQ1
1
C_Polarized
C1
5
10k
R1, R4, R6, R8, R10
5
20k
R2, R3, R5, R7, R9

LOS-DECEPTICONS-minisumo design files

The KiCad project lives in the diegobastianelli/LOS-DECEPTICONS-minisumo repository on GitHub; these links point at the commit this page was built from.

LOS-DECEPTICONS-minisumo: common questions

How big is the LOS-DECEPTICONS-minisumo PCB?

The LOS-DECEPTICONS-minisumo measures 60 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LOS-DECEPTICONS-minisumo?

27 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the LOS-DECEPTICONS-minisumo design files?

From the diegobastianelli/LOS-DECEPTICONS-minisumo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LOS-DECEPTICONS-minisumo design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which diegobastianelli chose for the repository.

Similar boards