FPGBC cartucho
digital-un-2026-2·FPGBC_cartucho·esquematico_cartucho/esquematico_cartucho.kicad_sch

About the FPGBC cartucho PCB
FPGBC cartucho is an open source FPGA PCB design by digital-un-2026-2, published on GitHub. It is a board, with 22 components from 11 distinct parts.
It is laid out to mount a board from the FPGA family. Other key parts include the S29GL064N90TFI04, FM28V100-TG and LJ245A. By type, the board carries 12 resistors, 4 ICs, 4 capacitors and 2 connectors.
From the project
Repositorio: digital-un-2026-2/FPGBCcartucho Asignatura:** Electrónica Digital - Universidad Nacional de Colombia (2026-2)
Repositorio: digital-un-2026-2/FPGBCcartucho Asignatura:** Electrónica Digital - Universidad Nacional de Colombia (2026-2)
- Juan Diego Rubiano Valero - C.C. 1025525548 - Pedro Nicolas Leguizamon Junco - C.C. 1002587011 - Juan José Rincón Monsalve - C.C. 1053442496 - Martín Rodríguez Galán - C.C. 1013099753
Esta sección del proyecto consiste en la recopilación y análisis del diseño de un cartucho compatible con las consolas Game Boy y Game Boy Color (GBC), creado por la empresa FunnyPlaying bajo el nombre de EverSave MBC5 GB/GBC Flash Cart 128KB.
Main components on the FPGBC cartucho
FPGBC cartucho bill of materials (BOM)
22 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | U1 | |
| 1 | S29GL064N90TFI04 | U2 | |
| 1 | FM28V100-TG | U3 | |
| 1 | LJ245A | U4 | |
| 1 | Conn_01x32 | J1 | |
| 1 | Conn_01x06 | J2 | |
| 2 | 47uf | C1, C4 | |
| 2 | 22 uf | C2, C3 | |
| 1 | 1k | R1 | |
| 6 | 10k | R2, RN2, RN4, RN6, RN8, RN10 | |
| 5 | 5.1k | RN1, RN3, RN5, RN7, RN9 |
FPGBC cartucho design files
The KiCad project lives in the digital-un-2026-2/FPGBC_cartucho repository on GitHub; these links point at the commit this page was built from.
FPGBC cartucho: common questions
How many components are on the FPGBC cartucho?
22 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the FPGBC cartucho design files?
From the digital-un-2026-2/FPGBC_cartucho repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the FPGBC cartucho design in my own project?
The repository has no license, so all rights stay with digital-un-2026-2. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FPGBC cartucho without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765