RoboticArm
DillonMaltese·RoboticArm·PCB/robot_arm_power_distribution_board/robot_arm_power_distribution_board.kicad_pcb
About the RoboticArm PCB
RoboticArm is an open source PCB design by DillonMaltese, published on GitHub. It is a 4-layer board measuring 110 × 165 mm, with 49 components from 24 distinct parts.
By type, the board carries 16 capacitors, 11 connectors, 11 fuses, 7 diodes, 2 test points and 2 resistors.
It belongs with the robotics & motion designs in this gallery.
RoboticArm bill of materials (BOM)
49 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XT60_Main_In | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J1 |
| 1 | XT30_M1 | AMASS_XT30UPB-M | J2 |
| 1 | XT30_M2 | AMASS_XT30UPB-M | J3 |
| 1 | XT30_M3 | AMASS_XT30UPB-M | J4 |
| 1 | XT30_M4 | AMASS_XT30UPB-M | J5 |
| 1 | XT30_M5 | AMASS_XT30UPB-M | J6 |
| 1 | XT30_B1 | AMASS_XT30UPB-M | J7 |
| 1 | XT30_B2 | AMASS_XT30UPB-M | J8 |
| 1 | XT30_B3 | AMASS_XT30UPB-M | J9 |
| 1 | XT30_B4 | AMASS_XT30UPB-M | J10 |
| 1 | XT30_B5 | AMASS_XT30UPB-M | J11 |
| 1 | 30A | CONN_3557-2_KEY | F1 |
| 1 | 7.5A | CONN_3557-2_KEY | F2 |
| 2 | 5A | CONN_3557-2_KEY | F3, F4 |
| 2 | 3A | CONN_3557-2_KEY | F5, F6 |
| 5 | 2A | FUSE_05200101Z_LTF | F7, F8, F9, F10, F11 |
| 1 | TP_BRAKE_24V | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
| 1 | TP_BRAKE_GND | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2 |
| 2 | LED | LED_D5.0mm | D1, D2 |
| 5 | D | DO-201AD_VIS | D3, D4, D5, D6, D7 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2200µF | CP_Radial_D18.0mm_P7.50mm | C1, C2 |
| 8 | 0.1µF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C4, C6, C7, C9, C14, C17, C21 |
| 6 | 470µF | CP_Radial_D10.0mm_P5.00mm | C5, C8, C10, C16, C20, C24 |
| 2 | 1.5kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
RoboticArm design files
The KiCad project lives in the DillonMaltese/RoboticArm repository on GitHub; these links point at the commit this page was built from.
RoboticArm: common questions
How big is the RoboticArm PCB?
The RoboticArm measures 110 × 165 mm, has 4 copper layers and is 1.74 mm thick.
How many components are on the RoboticArm?
49 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the RoboticArm design files?
From the DillonMaltese/RoboticArm repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RoboticArm design in my own project?
The repository has no license, so all rights stay with DillonMaltese. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979