Custom esc 35a

divyanshuprakas-h·custom_esc_35a·kicad/custom_esc_35a.kicad_pcb

Custom esc 35a PCB layout, top view — open source STM32 board by divyanshuprakas-h

About the Custom esc 35a PCB

Custom esc 35a is an open source STM32 PCB design by divyanshuprakas-h, published on GitHub. It is a 4-layer board measuring 30 × 16 mm, with 56 components from 26 distinct parts.

Its main chip is the STM32G071KBT6, from the STM32 family. Other key parts include the FD6288Q, SGM2203-3.3 and INA180A1. By type, the board carries 19 resistors, 14 capacitors, 6 transistors, 5 diodes and 4 ICs.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

Custom 3S-6S 35A/45A Single BLDC ESC (STM32G071 + FD6288Q + 6x MOSFETs) - 100% Routed & DRC-verified

A production-grade, ultra-compact 4-layer brushless Electronic Speed Controller (ESC) designed for 5-inch drone arms, micro-robotics, and high-performance UAV actuation. Engineered around the 64MHz 32-bit ARM Cortex-M0+ STM32G071KBT6 microcontroller, high-voltage FD6288Q 3-phase gate driver, and 6x low-RDS(on) 40V 100A Power DFN-8 MOSFETs.

The board is 100% routed and DRC-verified in KiCad 10 with 0 electrical violations and 0 unconnected nets.

Custom esc 35a, from the project README
From the project README

Main components on the Custom esc 35a

Custom esc 35a bill of materials (BOM)

56 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G071KBT6
U1
1
FD6288Q
U2
1
SGM2203-3.3
U3
1
INA180A1
U4
6
40V 60A N-FET
Q1, Q2, Q3, Q4, Q5, Q6
1
VBAT
PAD1
1
GND
PAD2
1
PWM
PAD3
1
TLM
PAD4
1
MOT_A
PAD5
1
MOT_B
PAD6
1
MOT_C
PAD7
1
0.5mR 2512
RS1
1
SMBJ28A
D1
3
BAT54WS
D2, D3, D4
1
LED_GREEN
D5
4
10uF 50V
C1, C2, C3, C4
3
1uF 50V
C5, C6, C7
5
100nF
C8, C9, C10, C11, C14
1
1uF
C12
Show 6 more
QtyPartRefs
1
2.2uF
C13
6
10R
R1, R2, R3, R4, R5, R6
7
10k
R7, R9, R10, R11, R15, R16, R17
2
1k
R8, R19
3
2.2k
R12, R13, R14
1
100R
R18

Custom esc 35a design files

The KiCad project lives in the divyanshuprakas-h/custom_esc_35a repository on GitHub; these links point at the commit this page was built from.

Custom esc 35a: common questions

What microcontroller does the Custom esc 35a use?

The Custom esc 35a is built around the STM32G071KBT6, from the STM32 family.

How big is the Custom esc 35a PCB?

The Custom esc 35a measures 30 × 16 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Custom esc 35a?

56 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Custom esc 35a design files?

From the divyanshuprakas-h/custom_esc_35a repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Custom esc 35a design in my own project?

The repository has no license, so all rights stay with divyanshuprakas-h. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Custom esc 35a without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards