8 open source boards using the FD6288Q
Real designs built with the FD6288Q, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RISC-V
AIO
ErBWs
63.1 × 63.5 mm155 parts4LGPL-3.034- schematic only · 13 partsAVR/Arduino
Rus slam
danilka-revin
13 partsNo license3 STM32
Dragonfly
Broccoliux
66 × 58.8 mm226 parts4LMIT2STM32
Little drone-
Mariavrgs
66 × 58.8 mm226 parts4LMIT0Esc
vili111111p
39 × 43 mm184 parts4LNo license0STM32
Custom esc 35a
divyanshuprakas-h
30 × 16 mm56 parts4LNo license0PiESC
CoPYGolF97
20 × 50 mm28 parts4LNo license0FMESC-1-C
apachecn
14 × 21 mm40 parts2LNo license0
How designs wire the FD6288Q
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the FD6288Q connects to, and the resistors, capacitors and other passives placed on it.
- The VS3_12 pin has a series capacitor on 7 of 7 designs, most often 10 µF (then 1 µF).
- The HO3_13 pin has a series resistor on 7 of 7 designs, most often 20 Ω (then 10 Ω).
- The VS2_15 pin has a series capacitor on 7 of 7 designs, most often 10 µF (then 1 µF).
- The HO2_16 pin has a series resistor on 7 of 7 designs, most often 20 Ω (then 10 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCC_4pin 4 | Connected to: 8V 100% |
|
| NC_1pin 5 | Connected to: Not connected 100% | — |
| COM_6pin 6 | Connected to: GND 100% | — |
| NC_2pin 7 | Connected to: Not connected 100% | — |
| NC_3pin 8 | Connected to: Not connected 100% | — |
| LO3_9pin 9 | Connected to: Signal 100% |
|
| LO2_10pin 10 | Connected to: Signal 100% |
|
| LO1_11pin 11 | Connected to: Signal 100% |
|
| VS3_12pin 12 | Connected to: A connector 43% |
|
| HO3_13pin 13 | Connected to: Signal 100% |
|
| VB3_14pin 14 | Connected to: Signal 100% |
|
| VS2_15pin 15 | Connected to: A connector 43% |
|
| HO2_16pin 16 | Connected to: Signal 100% |
|
| VB2_17pin 17 | Connected to: Signal 100% |
|
| VS1_18pin 18 | Connected to: A connector 43% |
|
| HO1_19pin 19 | Connected to: Signal 100% |
|
| VB1_20pin 20 | Connected to: Signal 100% |
|
| NC_4pin 21 | Connected to: Not connected 100% | — |
| EXP_25pin 25 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AIO by ErBWs, Dragonfly by Broccoliux, FMESC-1-C by apachecn and PiESC by CoPYGolF97.
The FD6288Q in open source designs
The gallery holds 8 open source boards using the FD6288Q from 8 GitHub repositories; a typical one measures about 39 × 50 mm and carries around 106 components.
86% use four copper layers or more, and 38% carry an open source license.
The most starred is AIO by ErBWs.
Parts used alongside the FD6288Q
Microcontrollers on boards using the FD6288Q
What boards using the FD6288Q are built for
FD6288Q: common questions
Where can I find a FD6288Q reference design?
Each of the 8 boards on this page is a real design using the FD6288Q. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FD6288Q VS3_12 pin connected?
The VS3_12 pin has a series capacitor on 7 of 7 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the FD6288Q.
What resistor goes on the FD6288Q HO3_13 pin?
The HO3_13 pin has a series resistor on 7 of 7 designs, most often 20 Ω (then 10 Ω). Counted from the KiCad layouts of 7 open source designs using the FD6288Q.
How is the FD6288Q VS2_15 pin connected?
The VS2_15 pin has a series capacitor on 7 of 7 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the FD6288Q.
What parts are used alongside the FD6288Q?
The AT32F421G8U7, AMS1117-3.3, AT7456E, BMP280 and ICM-20602 appear in the most repositories here.
Which microcontrollers do boards using the FD6288Q use?
Most are built on STM32 (3), AVR/Arduino (1) and RISC-V (1).
How big is a typical board using the FD6288Q?
The median is 39 × 50 mm, and 14% are two-layer designs.
What is the most popular open source board using the FD6288Q?
By GitHub stars, AIO by ErBWs, with 34 stars.
Can I simulate one of these boards using the FD6288Q before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.